Simulating geobag revetment failure processes

Khajenoori, Leila orcid iconORCID: 0000-0002-1632-2296, Wright, Grant and Crapper, Martin (2017) Simulating geobag revetment failure processes. In: 37th IAHR World Congress, August 13 – 18, 2017, Kuala Lumpur, Malaysia.

Full text not available from this repository.

Official URL: https://pdfs.semanticscholar.org/dceb/ca908acca396...

Abstract

An experimental and numerical study has been carried out to help develop design guidelines for the construction
of low-cost river bank protection using geobags. Building upon previous work, a 1:10 scale model was tested in
a laboratory flume, comparing two different construction methods (running bond and stack bond), subjected to
three different water depths. It was found that whilst the failure pattern was highly dependent on water depth,
the construction method had no noticeable impact, and it was concluded that the dominating factor is the friction
between individual geobags, which itself is dependent on bag overlap rather than specific construction method.
A simple Discrete Element Method (DEM) model was constructed using the LIGGGHTS open source software
with drag and lift models applied to a multi sphere simulation of the laboratory model geobags. It was found that
despite its simplicity this DEM model could reproduce the failure pattern of revetments very well, and thus has
potential for future use in developing design guidelines aimed at the developing world.


Repository Staff Only: item control page