Items where Subject is "H300 - Mechanical engineering"

[Atom feed] Atom [RSS2 feed] RSS
[BatchList tool] Batch List
Group by: Creators | Item Type
Number of items at this level: 188.

Article

Adeniyi, AA, Morvan, H and Simmons, K (2013) Droplet-film impact modelling using a coupled DPM-VoF approach, ISABE-2013-1419. 21st Int. Soc. for Air Breathing Engines (ISABE), Busan, Korea .

Adeniyi, Akinola A, Morvan, Hervé P and Simmons, Kathy A (2014) A Transient CFD Simulation of the Flow in a Test Rig of an Aeroengine Bearing Chamber, ASME GT2014-26399. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition .

Adeniyi, Akinola orcid iconORCID: 0000-0003-0768-9341, Morvan, HP and Simmons, KA (2016) A Computational Fluid Dynamics Simulation of Oil–Air Flow Between the Cage and Inner Race of an Aero-engine Bearing. Journal Of Engineering For Gas Turbines And Power, 139 (1). ISSN 0742-4795

Adeniyi, Akinola orcid iconORCID: 0000-0003-0768-9341, Morvan, Herv´e P. and Simmons, Kathy A (2017) A Coupled Euler-Lagrange CFD Modelling of Droplets-To-Film. The Aeronautical Journal, 121 (1246). pp. 1897-1918. ISSN 0001-9240

Aitchison, David R., Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291, Bain, Joseph B. and Pons, Dirk (2011) Rapid manufacturing facilitation through optimal machining prediction of polystyrene foam. Virtual and Physical Prototyping, 6 (1). pp. 41-46. ISSN 1745-2759

Al Shaer, Ahmad Wael orcid iconORCID: 0000-0002-5031-8493, Li, L. and Mistry, A. (2015) Understanding the Effect of Heat Input and Sheet Gap on Porosity Formation in Fillet Edge and Flange Couch Laser Welding of AC-170PX Aluminum Alloy for Automotive Component Manufacture. Journal of Manufacturing Science and Engineering, 137 (2). 021011. ISSN 1087-1357

Al Shaer, Ahmad Wael orcid iconORCID: 0000-0002-5031-8493, Li, Lin and Mistry, Anil (2017) Effect of filler wire properties on porosity formation in laser welding of AC-170PX aluminium alloy for lightweight automotive component manufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (6). pp. 994-1006. ISSN 0954-4054

Alshaer, Ahmad W. and Harland, Daniel John orcid iconORCID: 0000-0002-7967-7537 (2021) An investigation of the strength and stiffness of weight-saving sandwich beams with CFRP face sheets and seven 3D printed cores. Composite Structures, 257 (1). p. 113391. ISSN 02638223

Amaro, R.I., Martins, R.C., Seabra, J.O., Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 and Teer, D.G. (2005) Molybdenum disulphide/titanium low friction coating for gears application. Tribology International, 38 (4). pp. 423-434. ISSN 0301679X

Amaro, R.I., Martins, R.C., Seabra, J.O., Yang, S., Teer, D.G. and Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 (2005) Carbon/chromium low friction surface coating for gears application. Industrial Lubrication and Tribology, 57 (6). pp. 233-242. ISSN 0036-8792

Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Allison, David and Lomas, Kevin (2019) Automated dynamic thermal simulation of houses and housing stocks using readily available reduced data. Energy and Buildings, 203 (109431). ISSN 0378-7788

Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Golizadeh Akhlaghi, Yousef, Zhao, Xudong, Li, Jing, Yi, Fan and Zhanguyan, Wang (2020) Can whole building energy models outperform numerical models, when forecasting performance of indirect evaporative cooling systems? Energy Conversion and Management, 213 (112886). ISSN 0196-8904

Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Golizadeh Akhlaghi, Yousef, Zhao, Xudong, Samson, Shittu, Xiao, Xin, Li, Jing, Yi, Fan and Li, Guiqiang (2020) A chronological review of advances in solar assisted heat pump technology in 21st century. Renewable & Sustainable Energy Reviews, 132 (110132). ISSN 1364-0321

Bardsley, Andrew, Whitty, Justin orcid iconORCID: 0000-0003-1002-5271, Howe, Joseph Mark and Francis, Jonathan orcid iconORCID: 0000-0002-4436-4370 (2015) A review of in-situ loading conditions for mathematical modelling of asymmetric wind turbine blades. Fundamentals Of Renewable Energy and Applications, 5 (2). p. 153. ISSN 2090-4541

Battista, Emmanuele, Dell' Agnello, Simone, Esposito, Giampiero and Simo, Jules orcid iconORCID: 0000-0002-1489-5920 (2015) Quantum effects on Lagrangian points and displaced periodic orbits in the Earth-Moon system. Physical Review D: particles, fields, gravitation and cosmology, 91 (8). pp. 1-18. ISSN 1550-7998

Battista, Emmanuele, Dell'Agnello, Simone, Di Fiore, Luciano, Esposito, Giampiero, Simo, Jules orcid iconORCID: 0000-0002-1489-5920 and Grado, Aniello (2015) Earth-Moon Lagrangian points as a testbed for general relativity and effective field theories of gravity. Physical Review D (PRD), 92 (6). 064045. ISSN 1550-7998

Battista, Emmanuele, Esposito, Giampiero, Di Fiore, Luciano, Dell’Agnello, Simone, Simo, Jules orcid iconORCID: 0000-0002-1489-5920 and Grado, Aniello (2017) On solar system dynamics in general relativity. International Journal of Geometric Methods in Modern Physics (ijgmmp), 14 (9). pp. 1750117-1. ISSN 0219-8878

Battista, Emmanuele, Tartaglia, Angelo, Esposito, Giampiero, Lucchesi, David, Ruggiero, Matteo Luca, Valko, Pavol, Dell’Agnello, Simone, Di Fiore, Luciano, Simo, Jules orcid iconORCID: 0000-0002-1489-5920 et al (2017) Quantum time delay in the gravitational field of a rotating mass. Classical and Quantum Gravity, 34 (16).

Beizaee, Arash, Morey, Johanna and Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 (2021) Wintertime indoor temperatures in social housing dwellings in England and the impact of dwelling characteristics. Energy and Buildings, 238 (110837). ISSN 0378-7788

Bernasko, Peter K and Mallik, Sabuj orcid iconORCID: 0000-0002-2163-7620 (2015) Effect of intermetallic compound layer thickness on the shear strength of 1206 chip resistor solder joint. Soldering & Surface Mount Technology, 27 (1). pp. 52-58. ISSN 0954-0911

Bewsher, R, Leighton, M, Mohammadpour, M, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, Offner, G and Knaus, O (2019) Boundary friction characterisation of a used cylinder liner subject to fired engine conditions and surface deposition. Tribology International, 131 . pp. 424-437. ISSN 0301-679X

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 (2016) Design of conformal cooling layers with self-supporting lattices for additively manufactured tooling. Additive Manufacturing, 11 . pp. 16-22. ISSN 2214-7810

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 (2017) Tensile and fatigue failure of 3D printed parts with continuous fibre reinforcement. International Journal of Rapid Manufacturing, 6 (2/3). pp. 97-113. ISSN 1757-8817

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 and Aitchison, David (2010) Force feedback temperature control for hot-tool plastic foam cutting. Journal Of Engineering Manufacture - Part B, 224 (5). pp. 709-719. ISSN 0954-4054

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 and Aitchison, David (2010) A Review of State-of-the-Art Large Sized Foam Cutting Rapid Prototyping and Manufacturing Technologies. The Rapid Prototyping Journal, 16 (5). pp. 318-327. ISSN 1355-2546

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 and Molony, Samuel (2016) Design and evaluation of additively manufactured parts with three dimensional continuous fibre reinforcement. Materials and Design, 90 . pp. 276-283. ISSN 0261-3069

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291, Piorkowski, Barry Andrew and Lupeanu, Mihaela (2013) Research Towards High Speed Freeforming. International Journal of Rapid Manufacturing, 3 (2/3). pp. 154-171. ISSN 1757-8817

Calderbank, Graham John orcid iconORCID: 0000-0001-9403-6415, Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 (2020) Experimental Measurement of the Time-Based Development of Oil Film Thickness, Lubricating Film Extent and Lubricant Transport in Crosshead Engines. Lubricants, 9 (1). pp. 2-17. ISSN 2075-4442

Chen, Fucheng, Hu, Menglong, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Yu, Min, Huang, Zicong, Wang, Zhangyuan and Zhao, Xudong (2020) Experimental and numerical investigation of a novel photovoltaic/thermal system using micro-channel flat loop heat pipe (PV/T-MCFLHP). International Journal of Low-Carbon Technologies, 15 (4). pp. 513-527. ISSN 1748-1317

Chen, Haifei, Li, Guiqiang, Ling, Yueyue, Fu, Jie, Wang, Yunjie, Yang, Jie, Jiang, Lyulin, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 and Zhang, Yang (2021) Experimental Analysis of a Solar Energy Storage Heat Pump System. Journal of Thermal Science . ISSN 1003-2169

Chen, Haifei, Li, Guiqiang, Wang, Yunjie, Zhang, Fuwei, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Lu, Tao, Yang, Jie, Jiang, Lvlin and Zhang, Yang (2020) Experimental analysis of defrosting and heating performance of a solar-assisted heat pump integrated phase change energy storage. International Journal of Energy Research, 44 (3). pp. 2173-2182. ISSN 0363-907X

Chen, Haifei, Li, Guiqiang, Zhong, Yang, Wang, Yunjie, Cai, Baorui, Yang, Jie, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 and Zhang, Yang (2021) Exergy analysis of a high concentration photovoltaic and thermal system for comprehensive use of heat and electricity. Energy, 225 (120300). ISSN 0360-5442

Dickinson, M. orcid iconORCID: 0000-0001-6497-235X, Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 and Ahmed, W. orcid iconORCID: 0000-0003-4152-5172 (2013) A Novel System for Analysis of Surface Profiles from 3-D Components Using the Dickinson Rotating Ring Contact Profiler. International Journal of Surface Engineering and Interdisciplinary Materials Science, 1 (1). pp. 1-12. ISSN 2166-7225

Dickinson, M. orcid iconORCID: 0000-0001-6497-235X, Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 and Ahmed, W. orcid iconORCID: 0000-0003-4152-5172 (2013) Optimising piston ring contact face chamfer for high performance engines. SAE, - (-).

Dolatabadi, N, Forder, M, Morris, N, Rahmani, R, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 and Howell-Smith, S (2020) Influence of advanced cylinder coatings on vehicular fuel economy and emissions in piston compression ring conjunction. Applied Energy, 259 (114129). ISSN 0306-2619

Dolatabadi, Nader, Rahmani, Ramin, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 and Garner, Colin P. (2019) Thermal conductivity and molecular heat transport of nanofluids. RSC Advances, 9 (5). pp. 2516-2524.

Eccles, W, Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 and Arnell, Robert Derek (2010) Frictional changes during repeated tightening of zinc plated threaded fasteners. Tribology International, 43 (4). pp. 700-707. ISSN 0301-679X

Eccles, W., Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 and Arnell, Robert Derek (2010) Towards an understanding of the loosening characteristics of prevailing torque nuts. Proceedings of the Institution of Mechanical Enegineers Part C, 224 (2). pp. 483-495. ISSN 2041-2983

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael, Mallik, Sabuj orcid iconORCID: 0000-0002-2163-7620 and Otiaba, Kenny (2014) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). pp. 239-244. ISSN 0026-2714

Elisaus, Vishak, Mohammad Pour, Mahdi, Theodossiades, Stephanos and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2017) Effect of teeth micro-geometrical form modification on contact kinematics and efficiency of high performance transmissions. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 231 (3). pp. 538-555. ISSN 1464-4193

Fan, Yi, Zhao, Xudong, Han, Zhonghe, Li, Jing, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Golizadeh Akhlaghi, Yousef and Liu, Zhijian (2021) Scientific and technological progress and future perspectives of the solar assisted heat pump (SAHP) system. Energy, 229 (120719). ISSN 0360-5442

Fan, Yi, Zhao, Xudong, Li, Jing, Cheng, Yuanda, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Zhou, Jinzhi, Yu, Min, Li, Guiqiang, Du, Zhenyu et al (2020) Operational performance of a novel fast-responsive heat storage/exchanging unit (HSEU) for solar heating systems. Renewable Energy, 151 . pp. 137-151. ISSN 0960-1481

Fan, Yi, Zhao, Xudong, Li, Jing, Li, Guiqiang, Myers, Steve, Cheng, Yuanda, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Yu, Min, Golizadeh Akhlaghi, Yousef et al (2020) Economic and environmental analysis of a novel rural house heating and cooling system using a solar-assisted vapour injection heat pump. Applied Energy, 275 (115323). ISSN 0306-2619

Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, Trimmer, G, Womersley, B and Williams, A (2019) Effect of tooth profile modification on the durability of planetary hub gears. International Journal of Powertrains, 8 (1). pp. 40-57. ISSN 1742-4267

Fatourehchi, Ehsan, Mohammad Pour, Madhi, King, Paul D., Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, Trimmer, G, Williams, A and Womersley, B (2018) Effect of Mesh Phasing on the Transmission Efficiency and Dynamic Performance of Wheel Hub Planetary Gear Sets. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232 (19). pp. 3469-3481. ISSN 0954-4062

Feng, Geng orcid iconORCID: 0000-0002-4705-3252 (2018) Sensitivity Analysis for Systems under Epistemic Uncertainty with Probability Bounds Analysis. International Journal of Computer Applications, 179 (31). pp. 1-6. ISSN 0975-8887

Feng, Geng orcid iconORCID: 0000-0002-4705-3252, Patelli, Edoardo, Beer, Michael and Coolen, Frank P.A. (2016) Imprecise system reliability and component importance based on survival signature. Reliability Engineering & System Safety, 150 . pp. 116-125. ISSN 0951-8320

Forder, Michael, Umer, Jamal, Morris, Nicholas, Rahmani, Ramin, Howell-Smith, Sebastian and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2020) Asperity level frictional interactions of cylinder bore materials and lubricant composition. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology . ISSN 1350-6501

Francis, Jonathan orcid iconORCID: 0000-0002-4436-4370 and Parker, Darren (2015) Numerical simulation of observed flow phenomena in the supply and control ports and associated feed channels of a mini-vortex amplifier. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 229 . ISSN 0954-4062

Francis, Jonathan orcid iconORCID: 0000-0002-4436-4370, Parker, Darren, Whitty, Justin orcid iconORCID: 0000-0003-1002-5271 and Zhang, Guang Yao (2014) Control port influence on swirl, operating, and flow characteristics of a mini-vortex amplifier on glove box service. Journal Of Fluids Engineering, 136 (12). p. 121104. ISSN 0098-2202

Fsadni, A.M. orcid iconORCID: 0000-0003-3047-2714 and Ge, Y.T. Two-phase distribution in the vertical flow line of a domestic wet central heating system. European Physical Journal (Web of Conferences), 45 (1030).

Fsadni, Andrew M orcid iconORCID: 0000-0003-3047-2714, Whitty, Justin orcid iconORCID: 0000-0003-1002-5271, Stables, Matthew orcid iconORCID: 0000-0002-9971-9458 and Adeniyi, Akinola orcid iconORCID: 0000-0003-0768-9341 (2016) Numerical study on turbulent heat transfer and pressure drop characteristics of a helically coiled hybrid rectangular-circular tube heat exchanger with Al2O3-water nanofluids. Applied Thermal Engineering, 114 . pp. 466-483. ISSN 1359-4311

Furfaro, Roberto, Wibben, Daniel, Gaudet, Brian and Jules, Simo orcid iconORCID: 0000-0002-1489-5920 (2015) Terminal multiple surface sliding guidance for planetary landing: Development, tuning and optimization via reinforcement learning. Journal of the Astronautical Sciences, 62 (1). pp. 73-99. ISSN 0021-9142

Gallagher, M.T., Wain, Richard orcid iconORCID: 0000-0002-8796-0201, Dari, S., Whitty, Justin orcid iconORCID: 0000-0003-1002-5271 and Smith, D.J. (2019) Non-identifiability of parameters for a class of shear-thinning rheological models, with implications for haematological fluid dynamics. Journal of Biomechanics, 85 . pp. 230-238. ISSN 0021-9290

Garcia-Atance fatjo, Gonzalo orcid iconORCID: 0000-0002-3914-7160, Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 (2017) Piston-ring film thickness: theory and experiment compared. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (5). pp. 550-567. ISSN 1350-6501

Ge, Y.T., Fsadni, A.M. orcid iconORCID: 0000-0003-3047-2714 and Wang, H.S. (2013) Bubble dissolution in horizontal turbulent bubbly flow in domestic central heating system. Applied Energy, 108 . pp. 477-485.

Ghanbari, Ali orcid iconORCID: 0000-0003-1087-8426 (2024) Customized Batch Fabrication of Highly Sensitive Thin Capacitive Soft Sensors Based on High-Dielectric-Constant Composite Polymers. Advanced Sensor Research . (Submitted)

Gkinis, T, Rahmani, R and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2017) Effect of clutch lining frictional characteristics on take-up judder. Proceedings of institution of Mechanical Engineers, Part K: journal of multi-body dynamics, 231 (3). pp. 493-503. ISSN 1464-4193

Gkinis, Theofilos, Rahmani, Ramin and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2019) Integrated thermal and dynamic analysis of dry automotive clutch linings. Applied Sciences, 9 (20). p. 4287. ISSN 2076-3417

Golizadeh Akhlaghi, Yousef, Aslansefat, Koorosh, Zhao, Xudong, Sadati, Saba, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Xiao, Xin, Shittu, Samson, Fan, Yi and Ma, Xiaoli (2021) Hourly performance forecast of a dew point cooler using explainable Artificial Intelligence and evolutionary optimisations by 2050. Applied Energy, 281 (116062). ISSN 0306-2619

Golizadeh Akhlaghi, Yousef, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Zhao, Xudong, Aslansefat, Koorosh, Xiao, Xin, Shittu, Samson and Ma, Xiaoli (2020) A constraint multi-objective evolutionary optimization of a state-of-the-art dew point cooler using digital twins. Energy Conversion and Management, 211 (112772). ISSN 0196-8904

GolizadehAkhlaghi, Yousef, Xudong, Zhao, Shittu, Samson, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Cattaneo, Marco E.G.V. and Xiaoli, Ma (2019) Statistical investigation of a dehumidification system performance using Gaussian process regression. Energy and Buildings, 202 (109406). ISSN 0378-7788

Gong, Shengping and Simo, Jules orcid iconORCID: 0000-0002-1489-5920 (2014) Orbital motions of a solar sail around the L2 Earth-Moon libration point. Journal of Guidance, Control and Dynamics, 37 (4). pp. 1349-1356. ISSN 0731-5090

Gong, Shengping, Li, Junfeng, Baoyin, Hexi and Simo, Jules orcid iconORCID: 0000-0002-1489-5920 (2012) A new solar sail orbit. Science China Technological Sciences, 55 (3). pp. 848-855.

Harland, Daniel John orcid iconORCID: 0000-0002-7967-7537, Al Shaer, Ahmad Wael orcid iconORCID: 0000-0002-5031-8493 and Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 (2019) An Experimental and Numerical Investigation of a Novel 3D Printed Sandwich Material for Motorsport Applications. Procedia Manufacturing, 36 . pp. 11-18.

Hartungi, Rusdy and Jiang, Liben orcid iconORCID: 0000-0003-4686-5942 (2012) Energy efficiency and conservation in an office building: a case study. International Journal of Energy Sector Management, 6 (2). pp. 175-188. ISSN 1750-6220

Howell-Smith, Sebastian, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, King, Paul D. and Dowson, Duncan (2014) Reducing in-cylinder parasitic losses through surface modification and coating. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 228 (4). pp. 391-402. ISSN 0954-4070

Hu, Menglong, Luo, Liang, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Chen, Fucheng, Zheng, Siming, Wang, Zhangyuan and Zhao, Xudong (2020) Performance investigation of a micro-channel flat separated loop heat pipe system for data centre cooling. International Journal of Low-Carbon Technologies, 16 (1). pp. 98-113. ISSN 1748-1317

Hughes, Peter, Fairhurst, Jonathan, Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850, Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236, Morton, Leslie Hugh Glyn, Robery, Peter and Cunningham, L (2013) Microscopic examination of a new mechanism for accelerated degradation of synthetic fibre reinforced marine concrete. Construction and Building Materials, 41 . pp. 498-504. ISSN 0950-0618

Humphrey, E, Morris, N, Rahmani, R and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2018) Multiscale boundary frictional performance of diamond like carbon coatings. Tribology International . ISSN 0301-679X

Jiang, Liben orcid iconORCID: 0000-0003-4686-5942 (2014) Isothermal dehumidification with a simply thermoelectric device: concept and feasibility. International Journal of Ambient Energy . ISSN 0143-0750

Jiang, Liben orcid iconORCID: 0000-0003-4686-5942, Parry, Andrew, White, Craig and Hartungi, Rusdy (2012) Current Development of Carbon Capture and Storage in the UK – a Non Technical Review. International Journal of Low Carbon Technologies . ISSN ISSN: 1748-1317

Johns-Rahnejat, Patricia orcid iconORCID: 0000-0003-2490-8753, Dolatabadi, Nader and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2024) Elastic and Elastoplastic Contact Mechanics of Concentrated Coated Contacts. Lubricants, 12 (5).

Johns-Rahnejat, Patricia orcid iconORCID: 0000-0003-2490-8753, Rahmani, Ramin and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2023) Current and future trends in tribological research. Lubricants, 11 (9).

Johnson, Ben, Francis, Jonathan orcid iconORCID: 0000-0002-4436-4370, Howe, Joseph Mark and Whitty, Justin orcid iconORCID: 0000-0003-1002-5271 (2014) Computational actuator disc models for wind and tidal applications. Journal of Renewable Energy, 2014 (172461). ISSN 2314-4386

Kozuch, E, Nomikos, P, Rahmani, R, Morris, N and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2018) Effect of shaft surface roughness on the performance of radial lip seals. Lubricants, 6 (4). p. 99. ISSN 2075-4442

Lewis, Kate, Northrop, Alison J, Crook, Glen Martin, Mather, John, Martin, Jaime H, Holt, Danielle, Clayton, Hilary M, Roepstorff, Lars, Peterson, Michael et al (2015) Comparison of equipment used to measure shear properties in equine arena surfaces. Biosystems Engineering, 137 . pp. 43-54. ISSN 1537-5110

Li, Jing, Fan, Yi, Zhao, Xudong, Bai, Xiaoman, Zhou, Jinzhi, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955, Myers, Steve and Ma, Xiaoli (2020) Design and analysis of a novel dual source vapor injection heat pump using exhaust and ambient air. Energy and Built Environment . ISSN 2666-1233

Li, Jing, Yi, Fan, Zhao, Xudong, Bai, Xiaoman, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 and Ma, Xiaoli (2019) Thermodynamic analysis of an innovative heat pump using indoor and outdoor air as heat source. Bulgarian Chemical Communications, 51 (F). pp. 69-76. ISSN 0324-1130

Ma, MT, Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850, Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Grice, N (1997) Development of a detailed model for piston-ring lubrication in IC engines with circular and non-circular cylinder Bores. Tribology International, 30 (11). pp. 779-788. ISSN 0301679X

Mao, Qianjun, Li, Ying, Li, Guiqiang and Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 (2021) Study on the influence of tank structure and fin configuration on heat transfer performance of phase change thermal storage system. Energy, 235 (121382). ISSN 0360-5442

Mohammad pour, M, Theodossiades, S and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2014) Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairs. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 22 (1). pp. 19-33. ISSN 1464-4193

Morris, N, Leighton, M, De la Cruz, M, Rahmani, R, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 and Howell-Smith, S (2015) Combined numerical and experimental investigation of the micro-hydrodynamics of chevron-based textured patterns influencing conjunctional friction of sliding contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229 (4). pp. 316-335. ISSN 1350-6501

Morris, N, Rahmani, R and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2017) A hydrodynamic flow analysis for optimal positioning of surface textures. IMECHE Part J: Journal of Engineering Tribology, 231 (9). pp. 1140-1150. ISSN 1350-6501

Morris, N, Shahmohamadi, H, Rahmani, R, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 and Garner, C (2018) Combined experimental and multiphase computational fluid dynamics analysis of surface textured journal bearings in mixed regime of lubrication. Lubrication Sciences .

Mouratidou, Aliki D., Drosopoulos, Georgios orcid iconORCID: 0000-0002-4252-6321 and Stavroulakis, Georgios E. (2024) Ensemble of physics-informed neural networks for solving plane elasticity problems with examples. Acta Mechanica, 235 . pp. 6703-6722. ISSN 0001-5970

Musa, Ahmed, Yusuf, Yahaya orcid iconORCID: 0000-0001-6045-3245, Mc Ardle, Louise orcid iconORCID: 0000-0003-0039-0814 and Banjoko, Gbemisola (2013) Corporate social responsibility in Nigeria's oil and gas industry: the perspective of the industry. Int. J. of Process Management and Benchmarking, 3 (2). pp. 101-135.

Nomikos, Petros, Rahmani, Ramin, Morris, Nick and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2023) Measurement and prediction of thermal performance of automotive transmission radial lip seals. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering . ISSN 0954-4070

Oglieve, Callum, Sivayogan, Gajarajan, Mohammadpour, Mahdi and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2019) Lubricated loaded tooth contact analysis for spur gear pair. International Journal of Powertrains, 8 (1). pp. 23-39. ISSN 1742-4267

Onsy, Ahmed orcid iconORCID: 0000-0003-0803-5374, Fouad, Mohamed, Shaw, Brian and Dansereau, Richard M. (2014) A New Method for Monitoring Gears Surface Failures Using Enhanced Image Registration Approach. SAE International Journal of Aerospace, 7 (1). pp. 182-189.

Patelli, Edoardo, Feng, Geng orcid iconORCID: 0000-0002-4705-3252, Coolen, Frank P.A. and Coolen-Maturi, Tahani (2017) Simulation methods for system reliability using the survival signature. Reliability Engineering & System Safety, 167 . pp. 327-337. ISSN 0951-8320

Pierangelo, Masarati, Giuseppe, Quaranta, Lu, Linghai orcid iconORCID: 0000-0002-2688-7944 and Michael, Jump (2014) A closed loop experiment of collective bounce aeroelastic Rotorcraft – Pilot Coupling. Journal of Sound and Vibration, 333 (20). pp. 307-325. ISSN 0022-460X

Punzo, Giuliano, Simo, Jules orcid iconORCID: 0000-0002-1489-5920, Bennet, Derek James and Macdonald, Malcolm (2014) Characteristics of swarms on the edge of fragmentation. Physical Review E (PRE), 89 (3). pp. 1-5. ISSN 1539-3755

Rahmani, R, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, Fitzsimons, B and Dowson, D (2017) The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction. Applied Energy, 191 . pp. 568-581. ISSN 0306-2619

Rahmani, Ramin, Dolatabadi, Nader and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2023) Multiphysics performance assessment of hydrogen fuelled engines. International Journal of Engine Research . ISSN 1468-0874

Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, Johns-Rahnejat, Patricia orcid iconORCID: 0000-0003-2490-8753, Dolatabadi, N. and Rahmani, R. (2023) Multi-body dynamics in vehicle engineering. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics . ISSN 1464-4193

Rajab, Fatema H., Tariq A.S., Tayf, Al-Jumaily, Anmar K., Alshaer, Ahmad W. orcid iconORCID: 0000-0002-5031-8493, Li, Lin and Whitehead, Kathryn A. (2021) The influence of picosecond laser generated periodic structures on bacterial behaviour. Applied Surface Science, 540 (Part 1). p. 148292. ISSN 0169-4332

Reda, Mohamed, Onsy, Ahmed orcid iconORCID: 0000-0003-0803-5374, Haikal, Amira Y. and Ghanbari, Ali orcid iconORCID: 0000-0003-1087-8426 (2024) Optimizing the Steering of Driverless Personal Mobility Pods with a Novel Differential Harris Hawks Optimization Algorithm (DHHO) and Encoder Modeling. Sensors, 24 (14).

Selvi, Özgün orcid iconORCID: 0000-0003-4937-1489 and Gezgin, Erkin (2024) Path Optimization of a Collaborative Four-Bar Mechanism with an Elastic Coupler. Mechanism Design for Robotics (MEDER 2024), 166 . pp. 395-403. ISSN 2211-0984

Shahmohamadi, H, Mohammad Pour, M, Rahmani, R, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102, Garner, C and Howell-smith, S (2015) On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction. Tribology International, 90 . pp. 164-174. ISSN 0301-679X

Shark, Lik orcid iconORCID: 0000-0002-9156-2003, Lin, XY, Varley, Martin Roy, Matuszewski, Bogdan J orcid iconORCID: 0000-0001-7195-2509 and Smith, JP (2003) Lossless compression of radiographic images of aircraft components. Aircraft Engineering and Aerospace Technology, 75 (4). pp. 358-364. ISSN 0002-2667

Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 (2011) Oil film thickness measurement: a contribution to the understanding and control of lubrication in the piston-ring packs of IC engines. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (7). pp. 595-601. ISSN 1350-6501

Shittu, Samson, Li, Guiqiang, Tang, Xin, Zhao, Xudong, Ma, Xiaoli and Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 (2020) Analysis of thermoelectric geometry in a concentrated photovoltaic-thermoelectric under varying weather conditions. Energy, 202 (117742). ISSN 0360-5442

Simo, Jules orcid iconORCID: 0000-0002-1489-5920 and McInnes, Colin (2014) Feedback stabilization of displaced periodic orbits: applications to binary asteroids. Acta Astronautica, 96 . pp. 106-115. ISSN 0094-5765

Singh, Baij Nath and Kirkup, Stephen Martin orcid iconORCID: 0000-0002-9680-7778 (2024) Exploring MRR in Wire EDM of Titanium Grade 5: A Statistical Analysis. Journal of Mechanical Engineering Advancements, 1 (1). pp. 11-17.

Sivayogan, Gajarajan, Rahmani, Ramin and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2020) Lubricated loaded tooth contact analysis and non-newtonian thermoelastohydrodynamics of high-performance spur gear transmission systems. Lubricants, 8 (2). p. 20. ISSN 2075-4442

Sivayogan, Gajarajan, Rahmani, Ramin and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2022) Transient non-Newtonian elastohydrodynamics of rough meshing hypoid gear teeth subjected to complex contact kinematics. Tribology International, 167 . p. 107398. ISSN 0301-679X

Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 (2022) Observer-Based Control of Tilting-Pad Thrust Bearings. Lubricants, 10 (11). pp. 1-11.

Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 (2011) Optimising the design of a piston-ring pack using DoE methods. Tribology International, 44 (1). pp. 29-41. ISSN 0301-679X

Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Arnell, R Derek (2014) The Prediction of Frictional Temperature Increases in Dry, Sliding Contacts between Different Materials. Tribology Letters, 55 (2). pp. 315-328. ISSN 1023-8883

Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Arnell, R Derek (2013) A new approach to the calculation of flash temperatures in dry, sliding contacts. Tribology Letters, 53 (3). pp. 407-414. ISSN 1023-8883

Soejima, Mitsuhiro, Hamatake, Toshiro, Harigaya, Yasuo, Garcia-Atance fatjo, Gonzalo orcid iconORCID: 0000-0002-3914-7160, Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 (2019) Studies on Mechanism of Lubricating Oil Consumption for Diesel Engines Lubricated with Low Viscosity Oils. CIMAC 2019, Vancouver . (Unpublished)

Styles, Gemma, Rahmani, Ramin, Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 and Fitzsimons, Brian (2014) In-cycle and life-time friction transience in piston ring–liner conjunction under mixed regime of lubrication. International Journal of Engine Research, 15 (7). pp. 862-876. ISSN 1468-0874

Taylor, Robert Ian orcid iconORCID: 0000-0002-3132-8469 (2021) Duncan Dowson’s impact on industrial tribology. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (12). pp. 2604-2611. ISSN 1350-6501

Teo, WJ, Dolatabadi, N, Rahmani, R, Morris, N and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2018) Combined analytical and experimental evaluation of frictional performance of lubricated untextured and partially textured sliders. Lubricants, 6 (4). p. 88. ISSN 2075-4442,

Totuk, Onat Halis, Selvi, Özgün orcid iconORCID: 0000-0003-4937-1489 and Akar, Samet (2023) Fused filament fabrication in CAD education: A closed-loop approach. International Journal of Mechanical Engineering Education . ISSN 0306-4190

Turnbull, Robert, Dolatabadi, Nader, Rahmani, Ramin and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2023) Nonlinear tribodynamics of an elastic shaft with a flexible bearing outer race. Proceedings of the Institution of Mechanical Engineers Part K: Journal of Multi-Body Dynamics . ISSN 1464-4193

Umer, J, Morris, N, Leighton, M, Rahmani, R, Howell-Smith, SJ, Wild, R and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2018) Asperity level tribological investigation of automotive bore material and coatings. Tribology International, 117 . pp. 131-140. ISSN 0301-679X

Umer, J, Morris, N, Rahmani, R, Balakrishnan, S and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2020) Nanoscale frictional characterisation of base and fully formulated lubricants based on activation energy components. Tribology International, 144 (106115). ISSN 0301-679X

Umer, Jamal, Morris, Nick, Leighton, Michael, Rahmani, Ramin, Balakrishnan, Sashi and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2019) Nano and microscale contact characteristics of tribofilms derived from fully formulated engine oil. Tribology International, 131 . pp. 620-630. ISSN 0301-679X

Wain, Richard orcid iconORCID: 0000-0002-8796-0201, Gaskell, Nicolas, Fsadni, Andrew orcid iconORCID: 0000-0003-3047-2714, Francis, Jonathan orcid iconORCID: 0000-0002-4436-4370 and Whitty, Justin orcid iconORCID: 0000-0003-1002-5271 (2019) Finite element predictions of sutured and coupled microarterial anastomoses. Advanced Biomedical Engineering, 8 . pp. 63-77. ISSN 2187-5219

Wang, Lin, Liu, Xiongwei, Guo, Lianggang, Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 and Stables, Matthew (2014) A mathematical model for calculating cross-sectional properties of modern wind turbine composite blades. Renewable Energy, 64 . pp. 52-60. ISSN 0960-1481

Whitty, Justin orcid iconORCID: 0000-0003-1002-5271, Francis, Jonathan orcid iconORCID: 0000-0002-4436-4370, Howe, Joseph Mark and Henderson, Brian (2014) Computational modelling of structural integrity following mass loss in polymeric charred cellular solids. Journal of Computational Engineering, 2014 . p. 521610. ISSN 2356-7260

Xiao, Xin, Jia, Hongwei, Wen, Dongsheng, Golizadeh Akhkaghi, Yousef and Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 (2021) Experimental investigation of a latent heat thermal energy storage unit encapsulated with molten salt/metal foam composite seeded with nanoparticles. Energy and Built Environment . ISSN 2666-1233

mathias, Ekpu, Bhatti, Raj, Okereke, Michael, Mallik, Sabuj orcid iconORCID: 0000-0002-2163-7620 and Otiaba, Kenny (2014) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). pp. 159-166. ISSN 0026-2692

Book Section

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, M. J., Ali, N., Kousa, Y., Gracio, J., Cabral, G., Sousa, A., Shokufar, T., Titus, E. et al (2016) Surface Engineering of Artificial Heart Valves to Using Modified Diamond-like Coatings. In: Surgical Tools and Medical Devices. Springer, pp. 117-148. ISBN 978-3-319-33487-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, M. J., Novakov, T., Da Silva, M. B., Handy, R., Morrell, J., Robinson, G. and Whitfield, M. (2016) Atomic Scale Machining of Medical Materials. In: Surgical Tools and Medical Devices. Springer, pp. 1-54. ISBN 978-3-319-33487-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, M. J., Sein, H., Maryan, C., Jones, A., Verran, J., Ali, N., Hassan, I.U. and Rego, C. (2016) Dental Tool Technology. In: Surgical Tools and Medical Devices. Springer, pp. 195-224. ISBN 978-3-319-33487-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, M. J., Sein, H., Maryan, C., Jones, A., Verran, J., Ali, N., Hassan, I.U. and Rego, C. (2016) Diamond Surgical Tools. In: Surgical Tools and Medical Devices. Springer, pp. 149-194. ISBN 978-3-319-33487-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, M. J., Sein, H., Maryan, C., Jones, A., Verran, J., Ali, N., Hassan, I.U. and Rego, C. (2016) Nanocrystalline Diamond: Deposition Routes and Clinical Applications. In: Surgical Tools and Medical Devices. Springer, pp. 195-224. ISBN 978-3-319-33487-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Controlling structure and morphology. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 109-121. ISBN 978-3-319-00647-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Dental tools, Human tooth and environment. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 19-49. ISBN 978-3-319-00647-5 (Unpublished)

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Diamond deposition of tungstencarbide bursing VFCVD. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 97-107. ISBN 978-3-319-00647-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Diamond deposition onto flat substrates. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 73-81. ISBN 978-3-319-00647-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Diamond deposition onto wires and microdrills using VFCVD. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 83-95. ISBN 978-3-319-00647-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Diamonds synthesis, properties and applications. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 1-18. ISBN 978-3-319-00647-5

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) Growth and application of diamond thin films. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 51-71. ISBN 978-3-319-00647-5 (Unpublished)

Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172, Jackson, Mark J., Sein, Htet, Rego, Cristopher A., Elhissi, Adbelbary, Phoenix, David Andrew and Crean, Stjohn orcid iconORCID: 0000-0001-9336-8549 (2014) VFCVD diamond dental burs for improved performance. In: Chemical Vapour Deposition of Diamond for Dental Tools and Burs. SpringerBriefs in Materials . Springer, pp. 123-140. ISBN 978-3-319-00647-5

Al Shaer, Ahmad Wael orcid iconORCID: 0000-0002-5031-8493, Rajab, Fatema and Hamad, Abubaker (2017) Short Pulsed Laser Surface Texturing of Metallic Implants for Biomedical Applications. In: Laser Ablation: Advances in Research and Applications. Nova Science Publishers, USA, pp. 1-38. ISBN 978-1-53612-405-7

Anscombe, Sylvy orcid iconORCID: 0000-0002-9930-2804, Danino, Nicky orcid iconORCID: 0000-0001-7662-9188, Robinson, Sarita Jane orcid iconORCID: 0000-0002-4237-5412, Tennick, Catherine Jayne, Walsh, Robert William orcid iconORCID: 0000-0002-1025-9863, Wilcox, Adam and Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X (2020) Unmasked: The Science of Superheroes. In: Unmasked: The Science of Superheroes. UCLan Publishing, pp. 99-111. ISBN 9781912979080

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 (2008) Foam cutting mechanics for rapid prototyping and manufacturing purposes. In: 9th National Conference on Rapid Design, Prototyping & Manufacturing, Lancaster University. Buckinghamshire New University (BNU). ISBN 9780948314551

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 (2011) Variable fused deposition modelling - concept design and tool path generation. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified, pp. 113-122. ISBN 978-0-9566643-1-0

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 and Aitchison, David (2011) Using the Finite Element Method to Determine the Temperature Distributions in Hot-wire Cutting. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified. ISBN 978-0-9566643-1-0

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291, Rennie, A. E. W., Abrams, T. N., McGovern, J. and Caron, F. (2011) Variable Fused Deposition Modelling – analysis of benefits, concept design and tool path generation. In: Innovative Developments in Virtual and Physical Prototyping. Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 28 September - 1 October, 2011 . CRC Press, Leiria, Portugal, pp. 511-517. ISBN 978-0-415-68418-7

Khan, Iftikhar, Yousaf, Sakib, Akbed Alhnan, Mohamed, Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172 and Elhissi, Abdelbary (2016) Design Characteristics of Inhaler Devices Used for Pulmonary Delivery of Medical Aerosols. In: Surgical Tools and Medical Devices. Springer, pp. 573-592. ISBN 978-3-319-33487-5

Mueting, Joel, Furfaro, Roberto, Topputo, Francesco and Simo, Jules orcid iconORCID: 0000-0002-1489-5920 (2016) Optimal Sliding Guidance for Earth-Moon Halo Orbit Station-Keeping and Transfer. In: Spaceflight Mechanics 2016. Advances in the Astronautical Sciences. Univelt, Inc., San Diego, pp. 971-987.

Simo, J orcid iconORCID: 0000-0002-1489-5920 and McInnes, CR (2016) Potential Effects of a Realistic Solar Sail and Comparison to an Ideal Sail. In: Spaceflight Mechanics 2016. Advances in the Astronautical Sciences. Univelt, Inc., pp. 3107-3120.

Simo, Jules orcid iconORCID: 0000-0002-1489-5920 (2017) A Comparative Study of Displaced Non-Keplerian Orbits with Impulsive and Continuous Thrust. In: Spaceflight Mechanics 2017: Proceedings of the 27th AAS/AIAA Space Flight Mechanics Meeting. Univelt, Inc., San Diego, California, pp. 2531-2552.

Simo, Jules orcid iconORCID: 0000-0002-1489-5920, Furfaro, Roberto and Mueting, Joel (2015) Performance Evaluation of Artificial Neural Network-Based Shaping Algorithm for Planetary Pinpoint Guidance. In: Spaceflight Mechanics 2016. Advances in the Astronautical Sciences. Univelt, Inc., pp. 2233-2248.

Conference or Workshop Item

Adeniyi, AA, Morvan, HP and Simmons, KA (2015) A multiphase computational study of oil-air flow within the bearing sector of Aeroengines, ASME GT2015-43496. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15–19, 2015, Heat Transfer Montreal, Quebec, Canada.

Adeniyi, Akinola orcid iconORCID: 0000-0003-0768-9341 and Kirijen, Vengadasalam (2024) Using a Semi-Staging approach to Improve Oil Scoop Capture Efficiency. In: LUBRICANTS, TRIBOLOGY AND CONDITION MONITORING - THE CLOSEST ENCOUNTER BETWEEN SCIENCE AND INDUSTRY, 18th - 21st June 2024, San Sebastian, Spain.

Adeniyi, Akinola orcid iconORCID: 0000-0003-0768-9341, Morvan, Hervé P and Simmons, Kathy A (2016) Oil-Air Flow between the cage and inner race of an aeroengine bearing, ASME GT2016-56927. In: ASME Turbo Expo 2016: Turbine Technical Conference and Exposition ASME GT2016-56927, 13th-17th June, 2016, COEX Convention Centre, Seoul, South-Korea..

Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291, Clarkson, Philip, Davies, Paul and Fairclough, Daniel (2017) Sintering of 3D printed metal, ceramic and glass multi-material parts. In: 15th Rapid Design, Prototyping & Manufacturing (RDPM) Conference, 27-28th April 2017, Northumbria University, Newcastle. (Unpublished)

Calderbank, Graham John orcid iconORCID: 0000-0001-9403-6415, Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 and Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 (2012) The Effect of Oil Availability on the Operation of a Piston-Ring in a Large, Two Stroke Marine Diesel Engine. In: World Tribology Congress, September 2013, Torino. (Unpublished)

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X (2013) Optimising Piston Ring Contact Face Chamfer for High Performance Engines. In: SAE 2013 World Congress & Exhibition, April 2013, Detroit, USA.

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X, Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 and Ahmed, Waqar orcid iconORCID: 0000-0003-4152-5172 (2012) The refinement of the contact compression ring chamfer for race engine conditions. In: COMSOL Conference 2012.

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X, Renevier, Nathalie orcid iconORCID: 0000-0003-2471-7236 and Calderbank, John Astley (2014) A study into the compression ring rotation based on geometry. In: SAE 2014 World Congress and Exhibition, 08-10 April 2014, Detroit, Michigan, USA.

Fsadni, A.M. orcid iconORCID: 0000-0003-3047-2714 and Ge, Y.T. (2014) Bubble shape and breakage events in a vertical pipe at the boiler flow line. In: Experimental Fluid Mechanics, Czech Republic.

Fsadni, A.M. orcid iconORCID: 0000-0003-3047-2714 and Ge, Y.T. (2013) Two-phase distribution in the vertical flow line of a domestic wet central heating system. In: Experimental Fuild Mechanics, Hradec Kralove, Czech Republic.

Furfaro, Roberto, Topputo, Francesco, Mueting, Joel R., Casotto, Stefano and Simo, Jules orcid iconORCID: 0000-0002-1489-5920 (2016) Analysis and Performance Evaluation of the ZEM/ZEV Guidance and its Sliding Robustification for Autonomous Rendezvous in Relative Motion. In: 67th International Astronautical Congress (IAC), 26-30 September 2016, Guadalajara, Mexico.

GOLIZADEH AKHLAGHI, YOUSEF, Badiei, Ali orcid iconORCID: 0000-0002-2103-2955 and Zhao, Xudong (2020) A Novel Mathematical Model of the Solar Assisted Dehumidification and Regeneration Systems. In: 18th International Conference on Sustainable Energy Technologies – SET 2019, 20 - 22 August 2019, Kuala Lumpur, Malaysia.

Garcia-Atance Fatjo, Gonzalo orcid iconORCID: 0000-0002-3914-7160, Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 and Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 (2016) Assessing lubricating film thickness between compression rings and engine cylinders: A comprehensive comparison of theoretical predictions and experimental measurements. In: LubMaT2016 Lubrication Maintenance and Tribology, 7-8 June 2016, Bilbao Spain. (Unpublished)

Gillott, Mark and Jiang, Liben orcid iconORCID: 0000-0003-4686-5942 (2008) Performance of Revolving Bent Heat Pipe Heat Pump System. In: 7th International Conference on Sustainable Energy Technologies (SET2008), 24-27 August 2008, Seoul, Keroa.

Heaton, A E orcid iconORCID: 0000-0002-0523-1612, Fan, I S, Jennions, I K, Lawson, C and McFeat, J (2015) A V-Diagram for the Design of Integrated Health Management for Unmanned Aerial Systems. In: Annual Conference of the Prognostics and Health Management Society 2015, 19-24 Oct 2015, San Diego.

Jiang, Liben orcid iconORCID: 0000-0003-4686-5942 and Hartungi, Rusdy (2010) Performance of Revolving Straight Heat Pipe Heat Pump System with Thermoelectric Devices. In: 9th International conference of sustainable energy technologies (SET2010), 24-27, August 2010, Shanghai.

Johns-Rahnejat, Patricia orcid iconORCID: 0000-0003-2490-8753, Dolatabadi, N. and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2023) Contact Mechanics of Highly Loaded Counterformal Finite Line Contacts: Semi-Infinite and Layered Elastic Solids. In: Lubrication, Maintenance and Tribotechnology Conference (LUBMAT 2023), 17-19 July 2023, University of Central Lancashire, Preston.

Kozuch, Emilia, Nomikos, Petros, Morris, Nick, Rahmani, Ramin and Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 (2018) Performance evaluation of radial shaft seals of automotive transmission systems Abstract. In: 4th International Conference on Fluid Sealing (FS 2018), 7-8 March 2018, Manchester.

Morris, N., Forder, M., Dolatabadi, N., King, P., Rahmani, R., Rahnejat, Homer orcid iconORCID: 0000-0003-2257-7102 and Howell-Smith, S. (2023) Oil Control Ring Friction And Low Viscosity Lubricants: A Combined Numerical and Experimental Analysis. In: Lubrication, Maintenance and Tribotechnology Conference (LUBMAT 2023), 17-19 June 2023, University of Central Lancashire, Preston.

Philip, Jephin Thekemuriyil, Rashed, Omar H., Onsy, Ahmed orcid iconORCID: 0000-0003-0803-5374 and Varley, Martin Roy (2019) Development of a Driverless Personal Mobility Pod. In: 2018 24th International Conference on Automation and Computing (ICAC), 6-7 Sept. 2018, Newcastle upon Tyne, United Kingdom, United Kingdom.

Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850 and Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 (2018) Algorithmic Control of Lubrication in Tribotronic Systems. In: LUBMAT 2018, 5th & 6th June 2018, San Sebastian Spain. (Unpublished)

Tookey, Harry, Adeniyi, Akinola orcid iconORCID: 0000-0003-0768-9341 and Vengadasalam, Kirijen (2023) Characterisation of Splashing from Jet to Rotating Solid. In: Lubricants, Tribology and Condition Monitoring (LUBMAT 2023), 17th-19th July 2023, Preston.

Waite, Aidan Okane, Al Shaer, Ahmad Wael orcid iconORCID: 0000-0002-5031-8493 and Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X (2022) Novel 3D Printed Sandwich Materials with Variable Cellular Structures. In: Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Materials, ECCM20, 26-30 June 2022, Lausanne, Switzerland.

Book

Sherrington, Ian orcid iconORCID: 0000-0003-1283-9850, Onsy, Ahmed orcid iconORCID: 0000-0003-0803-5374, Rao, Raj, Brooks, Hadley Laurence orcid iconORCID: 0000-0001-9289-5291 and Philip, Jephin (2018) 30th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2017). COMADEM . Association for Computing Machinery (ACM), Preston.

Thesis

Almasidis, Iakovos (Jacob) (2003) A study of the influence of ring gap size on the lubrication of piston rings in an internal combustion engine. Masters thesis, University of Central Lancashire.

Bedford, Adam (2011) Strength in Flexibility; Research into Innovative Flexible Bearing Designs for Wave Convertor Permanent Magnet Generators. Doctoral thesis, Lancaster University.

Cao, Han (2011) Aerodynamics Analysis of Small Horizontal Axis Wind Turbine Blades by Using 2D and 3D CFD Modelling. Masters thesis, University of Central Lancashire.

Cliffe, R.W. (1981) A study of heuristic scheduling. Doctoral thesis, Preston Polytechnic.

Eccles, William (2010) Tribological Aspects of the Self-Loosening of Threaded Fasteners. Doctoral thesis, University of Central Lancashire.

Fsadni, A.M. orcid iconORCID: 0000-0003-3047-2714 (2012) The fundamentals of two-phase flow in wet domestic central heating systems. Doctoral thesis, Brunel University.

Hatton, Ronald (1980) Design of a feeder for miniature components: Investigation into the mode of operation and application of vibrating oblique blade. Masters thesis, University of Salford.

Lu, Gan (2011) Real-time Immersive human-computer interaction based on tracking and recognition of dynamic hand gestures. Doctoral thesis, University of Central Lancashire.

Smith, John P. (2004) Effective and Efficient Non-Destructive Testing of Large and Complex Shaped Aircraft Structures. Doctoral thesis, University of Central Lancashire.

Tang, Xinzi (2012) Aerodynamic design and analysis of small horizontal axis wind turbine blades. Doctoral thesis, University of Central Lancashire.

Image

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X (2020) coronavirus equipment pictures. [Image]

Video

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X (2020) PGR Reaserch Showcase Event - 02/06/2020. [Video]

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X, Dinham, Loraine Louise and Evans, Nathaniel (2022) Engineering Humans E1 - Powered Exoskeleton build. [Video]

Dickinson, Matthew orcid iconORCID: 0000-0001-6497-235X, Dinham, Loraine Louise and Evans, Nathaniel (2022) Engineering Humans E2 - Power Exoskeleton Demostration. [Video]

Other

Smith, Edward H orcid iconORCID: 0000-0003-0093-4463 (2021) Duncan Dowson – some recollections from a PhD student. SAGE.

This list was generated on Thu Oct 10 00:36:44 2024 UTC.