Aitchison, David R., Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Bain, Joseph B. and Pons, Dirk (2011) Rapid manufacturing facilitation through optimal machining prediction of polystyrene foam. Virtual and Physical Prototyping, 6 (1). pp. 41-46. ISSN 1745-2759
Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Abdallah, Ramy, Rajab, Fatema H. and Barzinjy, Azeez A. (2024) Understanding the machined material’s behaviour in electro-discharge machining (EDM) using a multi-phase smoothed particle hydrodynamics (SPH) modelling. International Journal of Advanced Manufacturing Technology, 134 . pp. 369-387. ISSN 0268-3768
Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, Lin and Mistry, Anil (2017) Effect of filler wire properties on porosity formation in laser welding of AC-170PX aluminium alloy for lightweight automotive component manufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (6). pp. 994-1006. ISSN 0954-4054
Bajoria, Aman, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 and Abdallah, Ramy (2024) Assessing wire EDM as a novel approach for CFRP drilling: performance and thermal analysis across lay-up configurations. International Journal of Advanced Manufacturing Technology, 134 . pp. 741-749. ISSN 0268-3768
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Aitchison, David (2010) Force feedback temperature control for hot-tool plastic foam cutting. Journal Of Engineering Manufacture - Part B, 224 (5). pp. 709-719. ISSN 0954-4054
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Aitchison, David (2010) A Review of State-of-the-Art Large Sized Foam Cutting Rapid Prototyping and Manufacturing Technologies. The Rapid Prototyping Journal, 16 (5). pp. 318-327. ISSN 1355-2546
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Molony, Samuel (2016) Design and evaluation of additively manufactured parts with three dimensional continuous fibre reinforcement. Materials and Design, 90 . pp. 276-283. ISSN 0261-3069
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Piorkowski, Barry Andrew and Lupeanu, Mihaela (2013) Research Towards High Speed Freeforming. International Journal of Rapid Manufacturing, 3 (2/3). pp. 154-171. ISSN 1757-8817
Coldwell, H.L, Dewes, R.C, Aspinwall, D.K, Renevier, Nathalie ORCID: 0000-0003-2471-7236 and Teer, D.G (2004) The use of soft/lubricating coatings when dry drilling BS L168 aluminium alloy. Surface and Coatings Technology, 177/8 . pp. 716-726. ISSN 0257-8972
Duerden, Christopher James, Shark, Lik-Kwan ORCID: 0000-0002-9156-2003, Hall, Geoff ORCID: 0000-0002-7391-3439 and Howe, Joseph Mark (2015) Minimisation of energy consumption variance for multi-process manufacturing lines through genetic algorithm manipulation of production schedule. Engineering Letters, 23 (1). pp. 40-48. ISSN 1816-093X
Fox, V, Jones, A, Renevier, Nathalie ORCID: 0000-0003-2471-7236 and Teer, D.G (2000) Hard lubricating coatings for cutting and forming tools and mechanical components. Surface and Coatings Technology, 125 (1-3). pp. 347-353. ISSN 0257-8972
Hopkins, Nicholas, Janse-van-Vuuren, Ruben and Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2020) Additive Manufacturing via Tube Extrusion (AMTEx). Additive Manufacturing, 36 . ISSN 2214-7810
Khalil, Jean ORCID: 0000-0002-5476-0799, Saad, Sameh M, Gindy, Nabil and MacKechnie, Ken (2005) A Maintenance Policy Selection Tool for Industrial Machine Parts. IFIP International Federation for Information Processing, 159 . pp. 431-440.
Khalil, Jean ORCID: 0000-0002-5476-0799, Saad, Sameh M. and Gindy, Nabil (2009) An integrated cost optimisation maintenance model for industrial equipment. Journal of Quality in Maintenance Engineering, 15 (1). pp. 106-118. ISSN 1355-2511
Renevier, Nathalie ORCID: 0000-0003-2471-7236 and Teer, D.G (2003) Elimination of lubricants in industries in using self-lubricating wear resistant coatings based on MoS2. Tribology International, 36 (11). p. 779. ISSN 0301-679X
Renevier, Nathalie ORCID: 0000-0003-2471-7236, Oosterling, H, König, U, Dautzenberg, H, Kim, B.J, Geppert, L, Koopmans, F.G.M and Leopold, J (2003) Performance and limitation of hybrid PECVD (hard coating)—PVD magnetron sputtering (MoS2/Ti composite) coated inserts tested for dry high speed milling of steel and grey cast iron. Surface and Coatings Technology, 163/4 . pp. 659-667. ISSN 0257-8972
Renevier, Nathalie ORCID: 0000-0003-2471-7236, Oosterling, H., König, U., Dautzenberg, H., Kim, B.J., Geppert, L., Koopmans, F.G.M. and Leopold, J. (2003) Performance and limitations of MoS2/Ti composite coated inserts. Surface and Coatings Technology, 172 (1). pp. 13-23. ISSN 02578972
Sadia, Muzna, Sośnicka, Agata, Arafat, Basel, Isreb, Abdullah ORCID: 0000-0001-9939-6161, Ahmed, Waqar ORCID: 0000-0003-4152-5172, Kelarakis, Antonios ORCID: 0000-0002-8112-5176 and Alhnan, Mohamed A (2016) Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets. International Journal of Pharmaceutics, 513 (1-2). pp. 659-668. ISSN 0378-5173
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2008) Foam cutting mechanics for rapid prototyping and manufacturing purposes. In: 9th National Conference on Rapid Design, Prototyping & Manufacturing, Lancaster University. Buckinghamshire New University (BNU). ISBN 9780948314551
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2011) Variable fused deposition modelling - concept design and tool path generation. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified, pp. 113-122. ISBN 978-0-9566643-1-0
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Aitchison, David (2011) Using the Finite Element Method to Determine the Temperature Distributions in Hot-wire Cutting. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified. ISBN 978-0-9566643-1-0
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Rennie, A. E. W., Abrams, T. N., McGovern, J. and Caron, F. (2011) Variable Fused Deposition Modelling – analysis of benefits, concept design and tool path generation. In: Innovative Developments in Virtual and Physical Prototyping. Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 28 September - 1 October, 2011 . CRC Press, Leiria, Portugal, pp. 511-517. ISBN 978-0-415-68418-7
Clark, Michael, Gibbs, D, Grime, E., K. and Law, C (1992) The North West. In: Regional Development in the 1990s. Regions and Cities . Routledge, London, UK, pp. 77-86. ISBN 978-0117023659
Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Clarkson, Philip, Davies, Paul and Fairclough, Daniel (2017) Sintering of 3D printed metal, ceramic and glass multi-material parts. In: 15th Rapid Design, Prototyping & Manufacturing (RDPM) Conference, 27-28th April 2017, Northumbria University, Newcastle. (Unpublished)
Heaton, A E ORCID: 0000-0002-0523-1612, Fan, I S, Jennions, I K, Lawson, C and McFeat, J (2015) A V-Diagram for the Design of Integrated Health Management for Unmanned Aerial Systems. In: Annual Conference of the Prognostics and Health Management Society 2015, 19-24 Oct 2015, San Diego.
Williams, Karl S ORCID: 0000-0003-2250-3488 (2010) Recycling of liquid crystal displays: manual or automated process? In: 5th World Recycling Forum WRF 2010, 5-18th November 2010, Hong Kong.
Abubakar, Tijjani (2014) A Study of Sustainability in the Oil and Gas Supply Chain. Doctoral thesis, University of Central Lancashire.
Broad, Anthony Ian (2012) Development of Vacuum Assisted Composites Manufacturing Technology for Wind Turbine Blade Manufacture. Masters thesis, University of Central Lancashire.
Cliffe, R.W. (1981) A study of heuristic scheduling. Doctoral thesis, Preston Polytechnic.
Herron, Colman (1998) Automated tesing of infusion devices. Masters thesis, University of Central Lancashire.
Michail, Antonios (2011) An investigation of the relationship between value chain activities and generic strategies in Small and Medium-sized Enterprises in UK manufacturing. Doctoral thesis, University of Central Lancashire.
Arman Hashemi, WJP HOLDINGS LIMITED (2012) THERMAL SHUTTER SYSTEM. PCT/EP2012/051803.