Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

A

Aitchison, David R., Brooks, Hadley L., Bain, Joseph B. and Pons, Dirk (2011) Rapid manufacturing facilitation through optimal machining prediction of polystyrene foam. Virtual and Physical Prototyping, 6 (1). pp. 41-46. ISSN 1745-2759

B

Bedford, Adam (2011) Strength in Flexibility; Research into Innovative Flexible Bearing Designs for Wave Convertor Permanent Magnet Generators. Doctoral thesis, Lancaster University.

Brooks, Hadley Laurence (2008) Foam cutting mechanics for rapid prototyping and manufacturing purposes. In: 9th National Conference on Rapid Design, Prototyping & Manufacturing, Lancaster University. Buckinghamshire Chilterns, University College. ISBN 9780948314551

Brooks, Hadley Laurence (2011) Variable fused deposition modelling - concept design and tool path generation. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified, pp. 113-122. ISBN 978-0-9566643-1-0

Brooks, Hadley Laurence and Aitchison, David (2010) Force feedback temperature control for hot-tool plastic foam cutting. Journal Of Engineering Manufacture - Part B, 224 (5). pp. 709-719. ISSN 0954-4054

Brooks, Hadley Laurence and Aitchison, David (2011) Using the Finite Element Method to Determine the Temperature Distributions in Hot-wire Cutting. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified. ISBN 978-0-9566643-1-0

Brooks, Hadley Laurence, Rennie, A. E. W., Abrams, T. N., McGovern, J. and Caron, F. (2011) Variable Fused Deposition Modelling – analysis of benefits, concept design and tool path generation. In: Innovative Developments in Virtual and Physical Prototyping. Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 28 September - 1 October, 2011 . CRC, Leiria, Portugal, pp. 511-517. ISBN 978-0-415-68418-7

Brooks, Hadley and Aitchison, David (2010) A Review of State-of-the-Art Large Sized Foam Cutting Rapid Prototyping and Manufacturing Technologies. The Rapid Prototyping Journal, 16 (5). pp. 318-327. ISSN 1355-2546

C

Cao, Han (2011) Aerodynamics Analysis of Small Horizontal Axis Wind Turbine Blades by Using 2D and 3D CFD Modelling. Masters thesis, University of Central Lancashire.

D

Dickinson, M., Renevier, N.M. and Ahmed, W. (2013) Optimising piston ring contact face chamfer for high performance engines. SAE . (In Press)

E

Eccles, W, Sherrington, Ian and Arnell, Robert Derek (2010) Frictional changes during repeated tightening of zinc plated threaded fasteners. Tribology International, 43 (4). pp. 700-707. ISSN 0301-679X

Eccles, W., Sherrington, I. and Arnell, R. D. (2010) Towards an understanding of the loosening characteristics of prevailing torque nuts. Proceedings of the Institution of Mechanical Enegineers Part C, 224 (2). pp. 483-495. ISSN 2041-2983

Eccles, William (2010) Tribological Aspects of the Self-Loosening of Threaded Fasteners. Doctoral thesis, University of Central Lancashire.

G

Gillott, Mark and Jiang, Liben (2008) Performance of Revolving Bent Heat Pipe Heat Pump System. In: 7th International Conference on Sustainable Energy Technologies (SET2008), 24-27 August 2008, Seoul, Keroa.

H

Hartungi, Rusdy and Jiang, Liben (2012) Energy efficiency and conservation in an office building: a case study. International Journal of Energy Sector Management, 6 (2). pp. 175-188. ISSN 1750-6220

Hughes, Peter, Fairhurst, Jonathan, Sherrington, Ian, Renevier, Nathalie, Morton, Leslie Hugh Glyn, Robery, Peter and Cunningham, L (2013) Microscopic examination of a new mechanism for accelerated degradation of synthetic fibre reinforced marine concrete. Construction and Building Materials, 41 . pp. 498-504. ISSN 0950-0618

J

Jiang, Liben and Hartungi, Rusdy (2010) Performance of Revolving Straight Heat Pipe Heat Pump System with Thermoelectric Devices. In: 9th International conference of sustainable energy technologies (SET2010), 24-27, August 2010, Shanghai.

Jiang, Liben, Parry, Andrew, White, Craig and Hartungi, Rusdy (2012) Current Development of Carbon Capture and Storage in the UK – a Non Technical Review. International Journal of Low Carbon Technologies . ISSN ISSN: 1748-1317

L

Lu, Gan (2011) Real-time Immersive human-computer interaction based on tracking and recognition of dynamic hand gestures. Doctoral thesis, University of Central Lancashire.

S

Shark, Lik, Lin, XY, Varley, Martin Roy, Matuszewski, Bogdan J and Smith , JP (2003) Lossless compression of radiographic images of aircraft components. Aircraft Engineering and Aerospace Technology, 75 (4). pp. 358-364. ISSN 0002-2667

Sherrington, I. (2011) Oil film thickness measurement: a contribution to the understanding and control of lubrication in the piston-ring packs of IC engines. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (7). pp. 595-601. ISSN 1350-6501

Smith, Edward H (2011) Optimising the design of a piston-ring pack using DoE methods. Tribology International, 44 (1). pp. 29-41. ISSN 0301-679X

Smith, John P. (2004) Effective and Efficient Non-Destructive Testing of Large and Complex Shaped Aircraft Structures. Doctoral thesis, University of Central Lancashire.

T

Tang, Xinzi (2012) Aerodynamic design and analysis of small horizontal axis wind turbine blades. Doctoral thesis, University of Central Lancashire.