You are here: Home » Research
|Up a level|
Aitchison, David R., Brooks, Hadley L., Bain, Joseph B. and Pons, Dirk (2011) Rapid manufacturing facilitation through optimal machining prediction of polystyrene foam. Virtual and Physical Prototyping, 6 (1). pp. 41-46. ISSN 1745-2759
Amaro, R.I., Martins, R.C., Seabra, J.O., Renevier, N.M. and Teer, D.G. (2005) Molybdenum disulphide/titanium low friction coating for gears application. Tribology International, 38 (4). pp. 423-434. ISSN 0301679X
Amaro, R.I., Martins, R.C., Seabra, J.O., Yang, S., Teer, D.G. and Renevier, N.M. (2005) Carbon/chromium low friction surface coating for gears application. Industrial Lubrication and Tribology, 57 (6). pp. 233-242. ISSN 0036-8792
Bardsley, Andrew, Whitty, Justin, Howe, Joseph Mark and Francis, Jonathan (2015) A review of in-situ loading conditions for mathematical modelling of asymmetric wind turbine blades. Fundamentals Of Renewable Energy and Applications, 5 (2). ISSN 2090-4541
Battista, Emmanuele, Dell' Agnello, Simone, Esposito, Giampiero and Simo, Jules (2015) Quantum effects on Lagrangian points and displaced periodic orbits in the Earth-Moon system. Physical Review D: particles, fields, gravitation and cosmology, 91 (8). pp. 1-18. ISSN 1550-7998
Bernasko, Peter K and Mallik, Sabuj (2015) Effect of intermetallic compound layer thickness on the shear strength of 1206 chip resistor solder joint. Soldering & Surface Mount Technology, 27 (1). pp. 52-58. ISSN 0954-0911
Brooks, Hadley Laurence and Aitchison, David (2010) Force feedback temperature control for hot-tool plastic foam cutting. Journal Of Engineering Manufacture - Part B, 224 (5). pp. 709-719. ISSN 0954-4054
Brooks, Hadley Laurence and Molony, Samuel (2015) Design and evaluation of additively manufactured parts with three dimensional continuous fibre reinforcement. Materials and Design, 90 . pp. 276-283. ISSN 0261-3069
Brooks, Hadley Laurence, Piorkowski, Barry Andrew and Lupeanu, Mihaela (2013) Research Towards High Speed Freeforming. International Journal of Rapid Manufacturing, 3 (2/3). pp. 154-171. ISSN 1757-8817
Brooks, Hadley and Aitchison, David (2010) A Review of State-of-the-Art Large Sized Foam Cutting Rapid Prototyping and Manufacturing Technologies. The Rapid Prototyping Journal, 16 (5). pp. 318-327. ISSN 1355-2546
Dickinson, M., Renevier, N.M. and Ahmed, W. (2013) A Novel System for Analysis of Surface Profiles from 3-D Components Using the Dickinson Rotating Ring Contact Profiler. International Journal of Surface Engineering and Interdisciplinary Materials Science, 1 (1). pp. 1-12. ISSN 2166-7225
Dickinson, M., Renevier, N.M. and Ahmed, W. (2013) Optimising piston ring contact face chamfer for high performance engines. SAE, - (-).
Dickinson, Matthew W., Renevier, Nathalie M. and Calderbank, John (2015) A Study into Compression Ring Dynamics using Response Surface Methodology. SAE International Journal of Passenger Cars - Mechanical Systems, 8 (1). pp. 92-94. ISSN 1946-4002
Eccles, W, Sherrington, Ian and Arnell, Robert Derek (2010) Frictional changes during repeated tightening of zinc plated threaded fasteners. Tribology International, 43 (4). pp. 700-707. ISSN 0301-679X
Eccles, W., Sherrington, I. and Arnell, Robert Derek (2010) Towards an understanding of the loosening characteristics of prevailing torque nuts. Proceedings of the Institution of Mechanical Enegineers Part C, 224 (2). pp. 483-495. ISSN 2041-2983
Ekpu, Mathias, Bhatti, Raj, Okereke, Michael, Mallik, Sabuj and Otiaba, Kenny (2014) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). pp. 239-244. ISSN 0026-2714
Francis, Jonathan and Parker, Darren (2015) Numerical simulation of observed flow phenomena in the supply and control ports and associated feed channels of a mini-vortex amplifier. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 229 . ISSN 0954-4062
Francis, Jonathan, Parker, Darren, Whitty, Justin and Zhang, Guobin (2014) Control port influence on swirl, operating, and flow characteristics of a mini-vortex amplifier on glove box service. Journal Of Fluids Engineering, 136 (12). ISSN 0098-2202
Fsadni, A.M. and Ge, Y.T. Two-phase distribution in the vertical flow line of a domestic wet central heating system. European Physical Journal (Web of Conferences), 45 (1030).
Furfaro, Roberto, Wibben, Daniel, Gaudet, Brian and Jules, Simo (2015) Terminal multiple surface sliding guidance for planetary landing: Development, tuning and optimization via reinforcement learning. Journal of the Astronautical Sciences, 62 (1). pp. 73-99. ISSN 0021-9142
Ge, Y.T., Fsadni, A.M. and Wang, H.S. (2013) Bubble dissolution in horizontal turbulent bubbly flow in domestic central heating system. Applied Energy, 108 . pp. 477-485.
Gong, Shengping and Simo, Jules (2014) Orbital motions of a solar sail around the L2 Earth-Moon libration point. Journal of Guidance, Control and Dynamics, 37 (4). pp. 1349-1356. ISSN 0731-5090
Hartungi, Rusdy and Jiang, Liben (2012) Energy efficiency and conservation in an office building: a case study. International Journal of Energy Sector Management, 6 (2). pp. 175-188. ISSN 1750-6220
Hughes, Peter, Fairhurst, Jonathan, Sherrington, Ian, Renevier, N.M., Morton, Leslie Hugh Glyn, Robery, Peter and Cunningham, L (2013) Microscopic examination of a new mechanism for accelerated degradation of synthetic fibre reinforced marine concrete. Construction and Building Materials, 41 . pp. 498-504. ISSN 0950-0618
Jiang, Liben (2014) Isothermal dehumidification with a simply thermoelectric device: concept and feasibility. International Journal of Ambient Energy . ISSN 0143-0750
Jiang, Liben, Parry, Andrew, White, Craig and Hartungi, Rusdy (2012) Current Development of Carbon Capture and Storage in the UK – a Non Technical Review. International Journal of Low Carbon Technologies . ISSN ISSN: 1748-1317
Johnson, Ben, Francis, Jonathan, Howe, Joseph Mark and Whitty, Justin (2014) Computational actuator disc models for wind and tidal applications. Journal of Renewable Energy, 2014 (172461).
Lewis, Kate, Northrop, Alison J, Crook, Glen Martin, Mather, John, Martin, Jaime H, Holt, Danielle, Clayton, Hilary M, Roepstorff, Lars, Peterson, Michael and Hobbs, Sarah Jane (2015) Comparison of equipment used to measure shear properties in equine arena surfaces. Biosystems Engineering, 137 . pp. 43-54. ISSN 1537-5110
Musa, Ahmed, Yusuf, Yahaya, Mc Ardle, Louise and Banjoko, Gbemisola (2013) Corporate social responsibility in Nigeria's oil and gas industry: the perspective of the industry. Int. J. of Process Management and Benchmarking, 3 (2). pp. 101-135.
Parker, D, Birch, Martin John and Francis, Jonathan (2011) Computational fluid dynamics studies of vortex amplifer design for the nuclear industry – I. Steady state conditions. Journal Of Fluids Engineering, 133 (4). ISSN 0098-2202
Pierangelo, Masarati, Giuseppe, Quaranta, Lu, Linghai and Michael, Jump (2014) A closed loop experiment of collective bounce aeroelastic Rotorcraft – Pilot Coupling. Journal of Sound and Vibration, 333 (20). pp. 307-325. ISSN 0022-460X
Punzo, Giuliano, Simo, Jules, Bennet, Derek James and Macdonald, Malcolm (2014) Characteristics of swarms on the edge of fragmentation. Physical Review E (PRE), 89 (3). pp. 1-5. ISSN 1539-3755
Shark, Lik, Lin, XY, Varley, Martin Roy, Matuszewski, Bogdan J and Smith, JP (2003) Lossless compression of radiographic images of aircraft components. Aircraft Engineering and Aerospace Technology, 75 (4). pp. 358-364. ISSN 0002-2667
Sherrington, I. (2011) Oil film thickness measurement: a contribution to the understanding and control of lubrication in the piston-ring packs of IC engines. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (7). pp. 595-601. ISSN 1350-6501
Simo, Jules and McInnes, Colin (2014) Feedback stabilization of displaced periodic orbits: applications to binary asteroids. Acta Astronautica, 96 . pp. 106-115. ISSN 0094-5765
Smith, Edward H (2011) Optimising the design of a piston-ring pack using DoE methods. Tribology International, 44 (1). pp. 29-41. ISSN 0301-679X
Smith, Edward H and Arnell, R Derek (2014) The Prediction of Frictional Temperature Increases in Dry, Sliding Contacts between Different Materials. Tribology Letters, 55 (2). pp. 315-328. ISSN 1023-8883
Smith, Edward H and Arnell, R Derek (2013) A new approach to the calculation of flash temperatures in dry, sliding contacts. Tribology Letters, 53 (3). pp. 407-414. ISSN 1023-8883
Wang, Lin, Liu, Xiongwei, Guo, Lianggang, Renevier, N.M. and Stables, Matthew (2014) A mathematical model for calculating cross-sectional properties of modern wind turbine composite blades. Renewable Energy, 64 . pp. 52-60. ISSN 09601481
Whitty, Justin, Francis, Jonathan, Howe, Joseph Mark and Henderson, Brian (2014) Computational modelling of structural integrity following mass loss in polymeric charred cellular solids. Journal of Computational Engineering, 2014 (521610). ISSN 2356-7260
mathias, Ekpu, Bhatti, Raj, Okereke, Michael, Mallik, Sabuj and Otiaba, Kenny (2014) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). pp. 159-166. ISSN 0026-2692
Brooks, Hadley Laurence (2008) Foam cutting mechanics for rapid prototyping and manufacturing purposes. In: 9th National Conference on Rapid Design, Prototyping & Manufacturing, Lancaster University. Buckinghamshire Chilterns, University College. ISBN 9780948314551
Brooks, Hadley Laurence (2011) Variable fused deposition modelling - concept design and tool path generation. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified, pp. 113-122. ISBN 978-0-9566643-1-0
Brooks, Hadley Laurence and Aitchison, David (2011) Using the Finite Element Method to Determine the Temperature Distributions in Hot-wire Cutting. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified. ISBN 978-0-9566643-1-0
Brooks, Hadley Laurence, Rennie, A. E. W., Abrams, T. N., McGovern, J. and Caron, F. (2011) Variable Fused Deposition Modelling – analysis of benefits, concept design and tool path generation. In: Innovative Developments in Virtual and Physical Prototyping. Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 28 September - 1 October, 2011 . CRC Press, Leiria, Portugal, pp. 511-517. ISBN 978-0-415-68418-7
Dickinson, Matthew, Renevier, N.M. and Calderbank, John Astley (2014) A study into the compression ring rotation based on geometry. In: SAE 2014 World Congress and Exhibition, 08-10 April 2014, Detroit, Michigan, USA.
Fsadni, A.M. and Ge, Y.T. (2014) Bubble shape and breakage events in a vertical pipe at the boiler flow line. In: Experimental Fluid Mechanics, Czech Republic.
Fsadni, A.M. and Ge, Y.T. (2013) Two-phase distribution in the vertical flow line of a domestic wet central heating system. In: Experimental Fuild Mechanics, Hradec Kralove, Czech Republic.
Gillott, Mark and Jiang, Liben (2008) Performance of Revolving Bent Heat Pipe Heat Pump System. In: 7th International Conference on Sustainable Energy Technologies (SET2008), 24-27 August 2008, Seoul, Keroa.
Heaton, A E, Fan, I S, Jennions, I K, Lawson, C and McFeat, J (2015) A V-Diagram for the Design of Integrated Health Management for Unmanned Aerial Systems. In: Annual Conference of the Prognostics and Health Management Society 2015, 19-24 Oct 2015, San Diego.
Jiang, Liben and Hartungi, Rusdy (2010) Performance of Revolving Straight Heat Pipe Heat Pump System with Thermoelectric Devices. In: 9th International conference of sustainable energy technologies (SET2010), 24-27, August 2010, Shanghai.
Bedford, Adam (2011) Strength in Flexibility; Research into Innovative Flexible Bearing Designs for Wave Convertor Permanent Magnet Generators. Doctoral thesis, Lancaster University.
Cao, Han (2011) Aerodynamics Analysis of Small Horizontal Axis Wind Turbine Blades by Using 2D and 3D CFD Modelling. Masters thesis, University of Central Lancashire.
Eccles, William (2010) Tribological Aspects of the Self-Loosening of Threaded Fasteners. Doctoral thesis, University of Central Lancashire.
Fsadni, A.M. (2012) The fundamentals of two-phase flow in wet domestic central heating systems. Doctoral thesis, Brunel University.
Lu, Gan (2011) Real-time Immersive human-computer interaction based on tracking and recognition of dynamic hand gestures. Doctoral thesis, University of Central Lancashire.
Smith, John P. (2004) Effective and Efficient Non-Destructive Testing of Large and Complex Shaped Aircraft Structures. Doctoral thesis, University of Central Lancashire.
Tang, Xinzi (2012) Aerodynamic design and analysis of small horizontal axis wind turbine blades. Doctoral thesis, University of Central Lancashire.