Items created by Al Shaer, Ahmad Wael

Article

Bajoria, Aman, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 and Abdallah, Ramy (2024) Assessing wire EDM as a novel approach for CFRP drilling: performance and thermal analysis across lay-up configurations. International Journal of Advanced Manufacturing Technology, 134 . pp. 741-749. ISSN 0268-3768

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Abdallah, Ramy, Rajab, Fatema H. and Barzinjy, Azeez A. (2024) Understanding the machined material’s behaviour in electro-discharge machining (EDM) using a multi-phase smoothed particle hydrodynamics (SPH) modelling. International Journal of Advanced Manufacturing Technology, 134 . pp. 369-387. ISSN 0268-3768

Salman, Safa N., Rajab, Fatema H., Issa, Ahmed and Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 (2024) Experimental and numerical analysis of microfluids Y-micromixer fabrication using CO2 laser. Optical and Quantum Electronics, 56 (7). ISSN 0306-8919

Rajab, Fatema, Al-Jumaily, Anmar K., A.S, Tayf Tariq, Stanescu, Sorin Laurentiu, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, Lin and Al-Hamd, Rwayda Kh. S. (2021) A Comparison of Characteristics of Periodic Surface Micro/Nano Structures Generated Via Single Laser Beam Direct Writing and Particle Lens Array Parallel Beam Processing. Journal of Micro and Nano-Manufacturing, 9 (2). ISSN 2166-0468

Rajab, Fatema H., Tariq A.S., Tayf, Al-Jumaily, Anmar K., Alshaer, Ahmad W. ORCID: 0000-0002-5031-8493, Li, Lin and Whitehead, Kathryn A. (2021) The influence of picosecond laser generated periodic structures on bacterial behaviour. Applied Surface Science, 540 (Part 1). p. 148292. ISSN 0169-4332

Harland, Daniel John ORCID: 0000-0002-7967-7537, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 and Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2019) An Experimental and Numerical Investigation of a Novel 3D Printed Sandwich Material for Motorsport Applications. Procedia Manufacturing, 36 . pp. 11-18.

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, Lin and Mistry, Anil (2017) Effect of filler wire properties on porosity formation in laser welding of AC-170PX aluminium alloy for lightweight automotive component manufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (6). pp. 994-1006. ISSN 0954-4054

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Rogers, B.D. and Li, L. (2017) Smoothed Particle Hydrodynamics (SPH) modelling of transient heat transfer in pulsed laser ablation of Al and associated free-surface problems. Computational Materials Science, 127 . pp. 161-179. ISSN 0927-0256

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, L. and Mistry, A. (2015) Understanding the Effect of Heat Input and Sheet Gap on Porosity Formation in Fillet Edge and Flange Couch Laser Welding of AC-170PX Aluminum Alloy for Automotive Component Manufacture. Journal of Manufacturing Science and Engineering, 137 (2). 021011. ISSN 1087-1357

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, L. and Mistry, A. (2014) The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminium alloy for automotive component manufacture. Optics and Laser Technology, 64 . pp. 162-171. ISSN 0030-3992

Book Section

Rajab, Fatema H, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 and Sahib, Tayf T A (2021) Effect of laser surface treatment on solar cell efficiency. In: Laser Micro- and Nano-Scale Processing- Fundamentals and applications. Institute of Physics Publishing (IOP).

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Rajab, Fatema and Hamad, Abubaker (2017) Short Pulsed Laser Surface Texturing of Metallic Implants for Biomedical Applications. In: Laser Ablation: Advances in Research and Applications. Nova Science Publishers, USA, pp. 1-38. ISBN 978-1-53612-405-7

Conference or Workshop Item

Waite, Aidan Okane, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 and Dickinson, Matthew ORCID: 0000-0001-6497-235X (2022) Novel 3D Printed Sandwich Materials with Variable Cellular Structures. In: Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Materials, ECCM20, 26-30 June 2022, Lausanne, Switzerland.