Morris, Nicholas, Rahmani, Ramin, Rahnejat, Homer ORCID: 0000-0003-2257-7102 and Bhushan, Bharat (2025) Air foil thrust and journal bearing coatings: A review. Journal of Tribology, 147 (1). ISSN 0742-4787

Umer, Jamal, Morris, Nicholas, Rahmani, Ramin, Rahnejat, Homer ORCID: 0000-0003-2257-7102, Howell-Smith, Sebastian and Balakrishnan, Sashi (2021) Effect of dispersant concentration with friction modifiers and anti-wear additives on the tribofilm composition and boundary friction. Journal of Tribology, 143 (11). ISSN 0742-4787

Rajab, Fatema, Al-Jumaily, Anmar K., A.S, Tayf Tariq, Stanescu, Sorin Laurentiu, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, Lin and Al-Hamd, Rwayda Kh. S. (2021) A Comparison of Characteristics of Periodic Surface Micro/Nano Structures Generated Via Single Laser Beam Direct Writing and Particle Lens Array Parallel Beam Processing. Journal of Micro and Nano-Manufacturing, 9 (2). ISSN 2166-0468

Orantes-Gonzalez, Eva, Heredia-Jimenez, Jose, Chohan, Ambreen ORCID: 0000-0003-0544-7832 and Richards, James ORCID: 0000-0002-4004-3115 (2021) A thorax marker set model to analyse the kinematics of walking without the need to place markers on the back. Journal Of Biomechanical Engineering, 143 (4). ISSN 0148-0731

Feng, Geng ORCID: 0000-0002-4705-3252, Beer, Michael, Coolen, Frank P.A., Ayyub, Bilal M. and Phoon, Kok-Kwang (2020) Editorial: Special Section On Resilience of Engineering Systems. American Society of Mechanical Engineers (ASME).

Morris, N, Patel, R and Rahnejat, Homer ORCID: 0000-0003-2257-7102 (2019) Hydrodynamic lubricant film separation during co-directional and counter-directional rotations of disengaged wet clutch packs. Journal of Fluids Engineering, 142 (1). ISSN 0098-2202

Fatourehchi, E, Shahmohamadi, H, Mohammad Pour, M, Rahmani, R, Theodossiades, S and Rahnejat, H (2018) Thermal Analysis of an Oil Jet-Dry Sump Transmission Gear under Mixed-Elastohydrodynamic Conditions. Journal of Tribology, 140 (5). 051502.

Adeniyi, Akinola ORCID: 0000-0003-0768-9341, Chandra, Budi and Simmons, Kathy (2017) Computational Study of a Customised Shallow-Sump Aero-Engine Bearing Chamber With Inserts to Improve Oil Residence Volume. In: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, June 26–30, 2017, Charlotte, North Carolina, USA.

Baker, C, Theodossiades, S, Rahmani, R, Rahnejat, Homer ORCID: 0000-0003-2257-7102 and Fitzsimons, B (2017) On the transient three dimensional tribodynamics of internal combustion engine top compression ring. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 139 (6). 062801. ISSN 0742-4795

Adeniyi, Akinola ORCID: 0000-0003-0768-9341, Morvan, Hervé P and Simmons, Kathy A (2016) Oil-Air Flow between the cage and inner race of an aeroengine bearing, ASME GT2016-56927. In: ASME Turbo Expo 2016: Turbine Technical Conference and Exposition ASME GT2016-56927, 13th-17th June, 2016, COEX Convention Centre, Seoul, South-Korea..

Adeniyi, Akinola ORCID: 0000-0003-0768-9341, Morvan, HP and Simmons, KA (2016) A Computational Fluid Dynamics Simulation of Oil–Air Flow Between the Cage and Inner Race of an Aero-engine Bearing. Journal Of Engineering For Gas Turbines And Power, 139 (1). ISSN 0742-4795

Morris, NJ, Rahmani, R, Rahnejat, Homer ORCID: 0000-0003-2257-7102, King, P and Howell-Smith, S (2015) A numerical model to study the role of surface textures at top dead center reversal in the piston ring to cylinder liner contact. Journal of Tribology: Transactions of the ASME, 138 (2). 021703-021703. ISSN 0742-4787

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, L. and Mistry, A. (2015) Understanding the Effect of Heat Input and Sheet Gap on Porosity Formation in Fillet Edge and Flange Couch Laser Welding of AC-170PX Aluminum Alloy for Automotive Component Manufacture. Journal of Manufacturing Science and Engineering, 137 (2). 021011. ISSN 1087-1357

Baker, C, Rahmani, R, Theodossiades, S, Rahnejat, Homer ORCID: 0000-0003-2257-7102 and Fitzsimons, B (2015) On the effect of transient in-plane dynamics of the compression ring upon its tribological performance. Journal of Engineering for Gas Turbines and Power, 137 (3). ISSN 0742-4795

Adeniyi, AA, Morvan, HP and Simmons, KA (2015) A multiphase computational study of oil-air flow within the bearing sector of Aeroengines, ASME GT2015-43496. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15–19, 2015, Heat Transfer Montreal, Quebec, Canada.

Francis, Jonathan ORCID: 0000-0002-4436-4370, Parker, Darren, Whitty, Justin ORCID: 0000-0003-1002-5271 and Zhang, Guang Yao (2014) Control port influence on swirl, operating, and flow characteristics of a mini-vortex amplifier on glove box service. Journal Of Fluids Engineering, 136 (12). p. 121104. ISSN 0098-2202

Mohammad pour, M, Theodossiades, S and Rahnejat, Homer ORCID: 0000-0003-2257-7102 (2014) Multi-physics investigations on the dynamics of differential hypoid gears. Journal of Vibration and Acoustics, 136 (4). ISSN 1048-9002

Kao, Kevin, Huang, Jheng-Jie and Pan, Min-Chun (2014) Design and Implementation of Assistive Devices for Poststroke Rehabilitation of Hand and Fingers. [LISCCC (Library and Information Service: Copyright Cleared Copies)]

Adeniyi, Akinola ORCID: 0000-0003-0768-9341, Morvan, Hervé P and Simmons, Kathy A (2014) A Transient CFD Simulation of the Flow in a Test Rig of an Aeroengine Bearing Chamber, ASME GT2014-26399. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition .

Baker, CE, Theodossiades, S, Rahnejat, Homer ORCID: 0000-0003-2257-7102 and Fitzsimons, B (2012) Influence of in-plane dynamics of thin compression rings on friction in internal combustion engines. Journal Of Engineering For Gas Turbines And Power, 134 (9). ISSN 0742-4795

Francis, Jonathan ORCID: 0000-0002-4436-4370, Birch, Martin John and Parker, D. (2012) Computational Fluid Dynamic Studies of Vortex Amplifier Design for the Nuclear Industry—II. Transient Conditions. Journal of Fluids Engineering, 134 (2). 021103. ISSN 00982202

Parker, D., Birch, Martin John and Francis, J. (2011) Computational Fluid Dynamic Studies of Vortex Amplifier Design for the Nuclear Industry—I. Steady-State Conditions. Journal of Fluids Engineering, 133 (4). 041103. ISSN 00982202

Phillips, David H., Martin, Francis L ORCID: 0000-0001-8562-4944, Hewer, A. and Osborne, M. R. (2002) Mechanisms of carcinogenicity and DNA adduct formation by tamoxifen. In: Proceedings of the 8th ICEM conference. American Society of Mechanical Engineers (ASME). ISBN 9780791835906

Hoffmann, F and Rahnejat, Homer ORCID: 0000-0003-2257-7102 (2001) Constrained multi-body dynamic analysis of shaft and bearing systems. ASME 2001 International Mechanical Engineering Congress and Exposition, 111 . pp. 77-85.