Items where Subject is "H141 - Fluid mechanics"

Article

Adeniyi, Akinola ORCID: 0000-0003-0768-9341, Morvan, HP and Simmons, KA (2016) A Computational Fluid Dynamics Simulation of Oil–Air Flow Between the Cage and Inner Race of an Aero-engine Bearing. Journal Of Engineering For Gas Turbines And Power, 139 (1). ISSN 0742-4795

Adeniyi, Akinola ORCID: 0000-0003-0768-9341, Morvan, Herv´e P. and Simmons, Kathy A (2017) A Coupled Euler-Lagrange CFD Modelling of Droplets-To-Film. The Aeronautical Journal, 121 (1246). pp. 1897-1918. ISSN 0001-9240

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Rogers, B.D. and Li, L. (2017) Smoothed Particle Hydrodynamics (SPH) modelling of transient heat transfer in pulsed laser ablation of Al and associated free-surface problems. Computational Materials Science, 127 . pp. 161-179. ISSN 0927-0256

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2016) Design of conformal cooling layers with self-supporting lattices for additively manufactured tooling. Additive Manufacturing, 11 . pp. 16-22. ISSN 2214-7810

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Wright, Chris, Harris, Stephen Anthony and Fsadni, Andrew ORCID: 0000-0003-3047-2714 (2018) Fire resistance of additively manufactured water filled polymer part. Additive Manufacturing, 22 . pp. 138-145. ISSN 2214-7810

Dailami, Keyvan, Nasriani, Hamid Reza ORCID: 0000-0001-9556-7218, Sajjadi, Seyed Adib, Rafiee, Mohammad Rafie, Whitty, Justin ORCID: 0000-0003-1002-5271 and Francis, Jonathan ORCID: 0000-0002-4436-4370 (2020) Optimizing the ultimate recovery by infill drilling using streamline simulation. Acta Scientiarum Technology, 42 . ISSN 1807-8664

Fsadni, Andrew M ORCID: 0000-0003-3047-2714, Whitty, Justin ORCID: 0000-0003-1002-5271, Stables, Matthew ORCID: 0000-0002-9971-9458 and Adeniyi, Akinola ORCID: 0000-0003-0768-9341 (2016) Numerical study on turbulent heat transfer and pressure drop characteristics of a helically coiled hybrid rectangular-circular tube heat exchanger with Al2O3-water nanofluids. Applied Thermal Engineering, 114 . pp. 466-483. ISSN 1359-4311

Garcia-Atance Fatjo, Gonzalo ORCID: 0000-0002-3914-7160 (2023) Prediction of ultrasonic cavitation with a dimensionless number, towards higher reproducibility. ArXiv .

Garcia-Atance fatjo, Gonzalo ORCID: 0000-0002-3914-7160 (2016) New dimensionless number to predict cavitation in accelerated fluid. International Journal of Computational Methods and Experimental Measurements, 4 (4). pp. 484-492. ISSN 2046-0546

Garcia-Atance fatjo, Gonzalo ORCID: 0000-0002-3914-7160, Smith, Edward H ORCID: 0000-0003-0093-4463 and Sherrington, Ian ORCID: 0000-0003-1283-9850 (2017) Piston-ring film thickness: theory and experiment compared. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (5). pp. 550-567. ISSN 1350-6501

Henshaw, Grant, Deyranlou, Amin ORCID: 0000-0003-4000-5693, Rimmer, Keith, Diaz, Heidi, Fitton, Richard and Keshmiri, Amir (2024) Experimental and computational assessment of an energy-saving innovation in a customised testing cabin. Energy and Buildings, 323 . ISSN 0378-7788

Hosseini, Seyed Ehsan, Deyranlou, Amin ORCID: 0000-0003-4000-5693, Talebizadehsardari, Pouyan, Mohammed, Hayder I. and Keshmiri, Amir (2024) Developing a numerical framework to study the cavitation and non-cavitation behaviour of a centrifugal pump inducer. International Journal of Naval Architecture and Ocean Engineering, 16 . ISSN 2092-6782

Keshavarzi, Alireza and Khajenoori, Leila ORCID: 0000-0002-1632-2296 (2010) Environmental protection stability of river bed and banks using convex, concave, and linear bed sills. Environmental Monitoring and Assessment, 171 (1-4). pp. 621-631. ISSN 0167-6369

Nasriani, Hamid Reza ORCID: 0000-0001-9556-7218, Khan, Khalid ORCID: 0000-0002-1296-7927, Graham, Tony Lee ORCID: 0000-0003-1414-1544, Ndlovu, Shephard ORCID: 0000-0002-2822-7851, Nasriani, Mehrdad, Mai, Jianqiang and Rafiee, Mohammad Rafie (2019) An investigation into sub-critical choke flow performance in high rate gas condensate wells. Energies, 12 (20). p. 3992. ISSN 1996-1073

Smith, Edward H ORCID: 0000-0003-0093-4463 (2020) On the Design and Lubrication of Water‐Lubricated, Rubber, Cutlass Bearings Operating in the Soft EHL Regime. Lubricants, 8 (75). pp. 1-14. ISSN 2075-4442

Smolka, Jan, Kempna, Kamila, Kucera, Petr, Kempny, Kamil, Asimakopoulou, Eleni ORCID: 0000-0001-5644-1372 and Danihelka, Pavel (2023) Setup of a 3D printed wind tunnel: application for calibrating bi-directional velocity probes used in Fire Engineering Applications. HardwareX, 15 (E00440).

Taylor, Robert Ian ORCID: 0000-0002-3132-8469 and Sherrington, Ian ORCID: 0000-0003-1283-9850 (2022) A Simplified Approach to the Prediction of Mixed and Boundary Friction. Tribology International, 175 . p. 107836. ISSN 0301679X

Wang, Lin, Liu, Xiongwei, Renevier, Nathalie ORCID: 0000-0003-2471-7236, Stables, Matthew and Hall, George M. (2014) Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory. Energy, 76 . pp. 487-501. ISSN 0360-5442

Conference or Workshop Item

Adeniyi, Akinola ORCID: 0000-0003-0768-9341 and Kirijen, Vengadasalam (2024) Using a Semi-Staging approach to Improve Oil Scoop Capture Efficiency. In: LUBRICANTS, TRIBOLOGY AND CONDITION MONITORING - THE CLOSEST ENCOUNTER BETWEEN SCIENCE AND INDUSTRY, 18th - 21st June 2024, San Sebastian, Spain.

Khajenoori, Leila ORCID: 0000-0002-1632-2296, Wright, Grant and Crapper, Martin (2017) Simulating geobag revetment failure processes. In: 37th IAHR World Congress, August 13 – 18, 2017, Kuala Lumpur, Malaysia.

Moradidowlatabad, H., Nasriani, Hamid Reza ORCID: 0000-0001-9556-7218, Zamani, N. and ZamaniMahmoudabad, Parisa (2020) Annular Flow Modelling and Advanced Well Completions Design Optimisation in Oil Rim Reservoirs. In: 82nd EAGE Annual Conference & Exhibition Workshop Programme, 8-11 December 2020, Amsterdam, The Netherlands.

Tookey, Harry, Adeniyi, Akinola ORCID: 0000-0003-0768-9341 and Vengadasalam, Kirijen (2023) Characterisation of Splashing from Jet to Rotating Solid. In: Lubricants, Tribology and Condition Monitoring (LUBMAT 2023), 17th-19th July 2023, Preston.