Items where Subject is "H700 - Production & manufacturing engineering"

A

Abubakar, Tijjani (2014) A Study of Sustainability in the Oil and Gas Supply Chain. Doctoral thesis, University of Central Lancashire.

Aitchison, David R., Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Bain, Joseph B. and Pons, Dirk (2011) Rapid manufacturing facilitation through optimal machining prediction of polystyrene foam. Virtual and Physical Prototyping, 6 (1). pp. 41-46. ISSN 1745-2759

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Abdallah, Ramy, Rajab, Fatema H. and Barzinjy, Azeez A. (2024) Understanding the machined material’s behaviour in electro-discharge machining (EDM) using a multi-phase smoothed particle hydrodynamics (SPH) modelling. International Journal of Advanced Manufacturing Technology, 134 . pp. 369-387. ISSN 0268-3768

Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493, Li, Lin and Mistry, Anil (2017) Effect of filler wire properties on porosity formation in laser welding of AC-170PX aluminium alloy for lightweight automotive component manufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (6). pp. 994-1006. ISSN 0954-4054

B

Bajoria, Aman, Al Shaer, Ahmad Wael ORCID: 0000-0002-5031-8493 and Abdallah, Ramy (2024) Assessing wire EDM as a novel approach for CFRP drilling: performance and thermal analysis across lay-up configurations. International Journal of Advanced Manufacturing Technology, 134 . pp. 741-749. ISSN 0268-3768

Broad, Anthony Ian (2012) Development of Vacuum Assisted Composites Manufacturing Technology for Wind Turbine Blade Manufacture. Masters thesis, University of Central Lancashire.

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2008) Foam cutting mechanics for rapid prototyping and manufacturing purposes. In: 9th National Conference on Rapid Design, Prototyping & Manufacturing, Lancaster University. Buckinghamshire New University (BNU). ISBN 9780948314551

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2011) Variable fused deposition modelling - concept design and tool path generation. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified, pp. 113-122. ISBN 978-0-9566643-1-0

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Aitchison, David (2010) Force feedback temperature control for hot-tool plastic foam cutting. Journal Of Engineering Manufacture - Part B, 224 (5). pp. 709-719. ISSN 0954-4054

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Aitchison, David (2010) A Review of State-of-the-Art Large Sized Foam Cutting Rapid Prototyping and Manufacturing Technologies. The Rapid Prototyping Journal, 16 (5). pp. 318-327. ISSN 1355-2546

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Aitchison, David (2011) Using the Finite Element Method to Determine the Temperature Distributions in Hot-wire Cutting. In: 12th Rapid Design, Prototyping & Manufacturing Conference. Unspecified. ISBN 978-0-9566643-1-0

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 and Molony, Samuel (2016) Design and evaluation of additively manufactured parts with three dimensional continuous fibre reinforcement. Materials and Design, 90 . pp. 276-283. ISSN 0261-3069

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Chadwick, Sam George, Riding, Alec and Saundry, Christian Luke (2024) Binder Injection Additive Manufacturing. (Submitted)

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Clarkson, Philip, Davies, Paul and Fairclough, Daniel (2017) Sintering of 3D printed metal, ceramic and glass multi-material parts. In: 15th Rapid Design, Prototyping & Manufacturing (RDPM) Conference, 27-28th April 2017, Northumbria University, Newcastle. (Unpublished)

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Piorkowski, Barry Andrew and Lupeanu, Mihaela (2013) Research Towards High Speed Freeforming. International Journal of Rapid Manufacturing, 3 (2/3). pp. 154-171. ISSN 1757-8817

Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291, Rennie, A. E. W., Abrams, T. N., McGovern, J. and Caron, F. (2011) Variable Fused Deposition Modelling – analysis of benefits, concept design and tool path generation. In: Innovative Developments in Virtual and Physical Prototyping. Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 28 September - 1 October, 2011 . CRC Press, Leiria, Portugal, pp. 511-517. ISBN 978-0-415-68418-7

C

Clark, Michael, Gibbs, D, Grime, E., K. and Law, C (1992) The North West. In: Regional Development in the 1990s. Regions and Cities . Routledge, London, UK, pp. 77-86. ISBN 978-0117023659

Cliffe, R.W. (1981) A study of heuristic scheduling. Doctoral thesis, Preston Polytechnic.

Coldwell, H.L, Dewes, R.C, Aspinwall, D.K, Renevier, Nathalie ORCID: 0000-0003-2471-7236 and Teer, D.G (2004) The use of soft/lubricating coatings when dry drilling BS L168 aluminium alloy. Surface and Coatings Technology, 177/8 . pp. 716-726. ISSN 0257-8972

D

Duerden, Christopher James, Shark, Lik-Kwan ORCID: 0000-0002-9156-2003, Hall, Geoff ORCID: 0000-0002-7391-3439 and Howe, Joseph Mark (2015) Minimisation of energy consumption variance for multi-process manufacturing lines through genetic algorithm manipulation of production schedule. Engineering Letters, 23 (1). pp. 40-48. ISSN 1816-093X

F

Fox, V, Jones, A, Renevier, Nathalie ORCID: 0000-0003-2471-7236 and Teer, D.G (2000) Hard lubricating coatings for cutting and forming tools and mechanical components. Surface and Coatings Technology, 125 (1-3). pp. 347-353. ISSN 0257-8972

H

Arman Hashemi, WJP HOLDINGS LIMITED (2012) THERMAL SHUTTER SYSTEM. PCT/EP2012/051803.

Heaton, A E ORCID: 0000-0002-0523-1612, Fan, I S, Jennions, I K, Lawson, C and McFeat, J (2015) A V-Diagram for the Design of Integrated Health Management for Unmanned Aerial Systems. In: Annual Conference of the Prognostics and Health Management Society 2015, 19-24 Oct 2015, San Diego.

Herron, Colman (1998) Automated tesing of infusion devices. Masters thesis, University of Central Lancashire.

Hopkins, Nicholas, Janse-van-Vuuren, Ruben and Brooks, Hadley Laurence ORCID: 0000-0001-9289-5291 (2020) Additive Manufacturing via Tube Extrusion (AMTEx). Additive Manufacturing, 36 . ISSN 2214-7810

K

Khalil, Jean ORCID: 0000-0002-5476-0799, Saad, Sameh M, Gindy, Nabil and MacKechnie, Ken (2005) A Maintenance Policy Selection Tool for Industrial Machine Parts. IFIP International Federation for Information Processing, 159 . pp. 431-440.

Khalil, Jean ORCID: 0000-0002-5476-0799, Saad, Sameh M. and Gindy, Nabil (2009) An integrated cost optimisation maintenance model for industrial equipment. Journal of Quality in Maintenance Engineering, 15 (1). pp. 106-118. ISSN 1355-2511

M

Michail, Antonios (2011) An investigation of the relationship between value chain activities and generic strategies in Small and Medium-sized Enterprises in UK manufacturing. Doctoral thesis, University of Central Lancashire.

O

Ollerenshaw, Lee (2024) REDUCING WASTE WITHIN THE HIGH PRECISION MANUFACTURING INDUSTRY TO ACHIEVE UK NET ZERO AND SUSTAINABILITY TARGETS. A CASE STUDY: ELE ADVANCED TECHNOLOGIES. Masters thesis, University of Central Lancashire.

R

Renevier, Nathalie ORCID: 0000-0003-2471-7236 and Teer, D.G (2003) Elimination of lubricants in industries in using self-lubricating wear resistant coatings based on MoS2. Tribology International, 36 (11). p. 779. ISSN 0301-679X

Renevier, Nathalie ORCID: 0000-0003-2471-7236, Oosterling, H, König, U, Dautzenberg, H, Kim, B.J, Geppert, L, Koopmans, F.G.M and Leopold, J (2003) Performance and limitation of hybrid PECVD (hard coating)—PVD magnetron sputtering (MoS2/Ti composite) coated inserts tested for dry high speed milling of steel and grey cast iron. Surface and Coatings Technology, 163/4 . pp. 659-667. ISSN 0257-8972

Renevier, Nathalie ORCID: 0000-0003-2471-7236, Oosterling, H., König, U., Dautzenberg, H., Kim, B.J., Geppert, L., Koopmans, F.G.M. and Leopold, J. (2003) Performance and limitations of MoS2/Ti composite coated inserts. Surface and Coatings Technology, 172 (1). pp. 13-23. ISSN 02578972

S

Sadia, Muzna, Sośnicka, Agata, Arafat, Basel, Isreb, Abdullah ORCID: 0000-0001-9939-6161, Ahmed, Waqar ORCID: 0000-0003-4152-5172, Kelarakis, Antonios ORCID: 0000-0002-8112-5176 and Alhnan, Mohamed A (2016) Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets. International Journal of Pharmaceutics, 513 (1-2). pp. 659-668. ISSN 0378-5173

W

Williams, Karl S ORCID: 0000-0003-2250-3488 (2010) Recycling of liquid crystal displays: manual or automated process? In: 5th World Recycling Forum WRF 2010, 5-18th November 2010, Hong Kong.